Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | TD:23°C,72小时 | ISO2577 | 1.0to1.2 | % |
Modeling Shrinkage | TD:23°C,72小时 | ISO2577 | 1.0to1.2 | % |
Modeling Shrinkage | MD:23°C,72小时 | ISO2577 | 0.90to1.1 | % |
Modeling Shrinkage | MD:23°C,72小时 | ISO2577 | 0.90to1.1 | % |
Melt Volume flow Rate | 275°C/5.0kg | ISO1133 | 165 | cm3/10min |
Melt Volume flow Rate | 275°C/5.0kg | ISO1133 | 165 | cm3/10min |
Viscosity number | | ISO307 | 145 | cm³/g |
Density | | ISO1183 | 1.14 | g/cm³ |
Density | | ISO1183 | 1.14 | g/cm³ |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flexural Stress | | ISO178 | 135 | Mpa |
Flexural Stress | | ISO178 | 135 | Mpa |
Tensile Modulus | | ISO527-2/1 | 3200 | Mpa |
Tensile Modulus | | ISO527-2/1 | 3200 | Mpa |
Flexural Modulus | | ISO178 | 2800 | Mpa |
Flexural Modulus | | ISO178 | 2800 | Mpa |
Flexural Modulus | | ISO178 | 2800 | Mpa |
Tensile Stress | 屈服 | ISO527-2/5 | -- | Mpa |
Tensile Stress | 屈服 | ISO527-2/5 | -- | Mpa |
Tensile Stress | 屈服 | ISO527-2/50 | 80.0 | Mpa |
Tensile Strain | 断裂 | ISO527-2/50 | 40 | % |
Tensile Strain | 断裂 | ISO527-2/50 | 40 | % |
Tensile Strain | 断裂 | ISO527-2/5 | -- | % |
Tensile Strain | 断裂 | ISO527-2/5 | -- | % |
Tensile Strain | 断裂 | ISO527-2/5 | -- | % |
Tensile Strain | 断裂 | ISO527-2/5 | -- | % |
Tensile Strain | 断裂 | ISO527-2/5 | -- | % |
Tensile Strain | 断裂 | ISO527-2/50 | 40 | % |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melting temperature | | ISO11357-3 | 222 | °C |
Melting temperature | | ISO11357-3 | 222 | °C |
Melting temperature | | ISO11357-3 | 222 | °C |
Melting temperature | | ISO11357-3 | 222 | °C |
Melting temperature | | ISO11357-3 | 222 | °C |
Melting temperature | | ISO11357-3 | 222 | °C |
Melting temperature | | ISO11357-3 | 222 | °C |
Deflection Temperature Under Load? | 1.8MPa,未退火 | ISO75-2/A | 65.0 | °C |
Deflection Temperature Under Load? | 1.8MPa,未退火 | ISO75-2/A | 65.0 | °C |
Deflection Temperature Under Load? | 0.45MPa,未退火 | ISO75-2/B | 175 | °C |
Vicat Softening Temperature | | ISO306/B50 | 200 | °C |
Vicat Softening Temperature | | ISO306/B50 | 200 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Comparative Tracking Index | 解决方案A | IEC60112 | 600 | V |
Surface Resistivity | | IEC60093 | 1E+13 | ohms |
Volume Resistivity | | IEC60093 | 1E+15 | ohms·cm |
Volume Resistivity | | IEC60093 | 1E+15 | ohms·cm |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Notched Impact Strength | 23°C | ISO179/1eA | 5.0 | kJ/m² |
Notched Izod Impact Strength | 23°C | ISO180/1A | 5.0 | kJ/m² |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Glow Wire Flammability Index | 1.0到3.0mm | IEC60695-2-12 | 750to850 | °C |
Glow Wire Flammability Index | 1.0到3.0mm | IEC60695-2-12 | 750to850 | °C |
Glow Wire Flammability Index | 1.0到3.0mm | IEC60695-2-12 | 750to850 | °C |
Burning Rate | | FMVSS302 | <100 | mm/min |
Burning Rate | | FMVSS302 | <100 | mm/min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.