Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | Flow : 2.00 mm | 内部方法 | 0.10 | % |
Modeling Shrinkage | Across Flow : 2.00 mm | 内部方法 | 1.0 | % |
Melt Mass-Flow Rate | 230°C/2.16 kg | ISO 1133 | 5.0 | g/10 min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flexural Modulus | | ISO 178 | 6300 | Mpa |
Tensile Stress | | ISO 527-2/50 | 105 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 0.45 MPa, Unannealed | ISO 75-2/B | 160 | °C |
Injection | Test Condition | Test Method | Test Result | Unit |
---|
Processing (Melt) Temp | | | 230 到 280 | °C |
Mold Temperature | | | 30 到 50 | °C |
Holding Pressure | | | 30.0 到 60.0 | Mpa |
Hopper Temperature | | | 40 到 80 | °C |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Emission | | VDA 277 | < 50.0 | µgC/g |
Haze | 100°C | DIN 75201 | < 2.0 | mg |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.