Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Melt Mass-Flow Rate | ℃/Kg | ASTMD1238 | 65 | g/10min |
Melt Mass-Flow Rate | 模具收缩率 | 内部方法 | 1.6 | % |
Melt Mass-Flow Rate | 模具收缩率 | 内部方法 | 1.7 | % |
Density / Specific Gravity | | ASTMD792 | 0.900 | g/cm³ |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Notched Izod Impact Strength | 23°C | ASTMD256 | 65 | J/m |
Notched Izod Impact Strength | 悬壁梁Notched冲击强度 | ASTMD256 | 40 | J/m |
Tensile Elongation?(Break) | 23°C | ASTMD638 | 50 | % |
Tensile Strength | Yield,23°C | ASTMD638 | 27.5 | Mpa |
Tensile Strength | 23°C | ASTMD638 | 17.0 | Mpa |
Flexural Modulus | 23°C | ASTMD790 | 1320 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 0.45MPaUnannealed | ASTMD648 | 126 | °C |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | | ASTMD785 | 92 | R |
Other performance | Test Condition | Test Method | Test Result | Unit |
---|
weatherability | | 内部方法 | 1.4 | month |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.