Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt Mass-Flow Rate | | ASTM D1238/ISO 1133 | 26.4 | g/10min |
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt Mass-Flow Rate | 220℃/10kg，GB/T 3682 | ≥16.0 | 25.0 | g/10min |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Impact Strength | ，GB/T 1043.1 | ≥16.0 | 16.3 | kJ/m² |
| Tensile Strength | ，GB/T 1040.2 | | 45.0 | Mpa |
| Tensile Strength | | ASTM D638/ISO 527 | 44.6 | kg/cm²(MPa)[Lb/in²] |
| Charpy impact strength | | ASTM D256/ISO 179 | 16.8 | kg·cm/cm(J/M)ft·lb/in |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Vicat Softening Temperature | 50N,50℃/h，GB/T 1633 | | 93.0 | °C |
| Vicat Softening Temperature | | ASTM D1525/ISO R306 | 94.6 | ℃（℉） |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Gloss | 60°，GB/T 8807 | | 75 | % |
| Other performance | Test Condition | Test Method | Test Result | Unit |
|---|
| appearance | ，目测 | 白色颗粒 | 白色颗粒 | |
| 有颜色粒子 | ，Q/SH 3165 253-2011 | ≤2 | 2 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
