ABS CYCOLAC™ FR23-NA1000 SABIC INNOVATIVE US

Unit Price:
$3897 USD/MT
Packaging Specification:
25KG/PKG
Supply Quantity:
44.5MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Melt Mass-Flow Rate	230°C/3.8 kg	ASTM D1238	6.8	g/10 min
Melt Mass-Flow Rate	Melt Mass-Flow Rate	220°C/5.0 kg	ISO 1133	9.0	g/10 min
Melt Volume flow Rate	220°C/10.0 kg	ISO 1133	37.0	cm3/10min
Modeling Shrinkage - Flow	3.20 mm	内部方法	0.50 到 0.70	%

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Tensile Modulus		ASTM D638	2410	Mpa
Tensile Elongation	Yield	ASTM D638	2.1	%
Tensile Elongation	Tensile Elongation	Break	ASTM D638	11	%
Tensile Strength	Yield	ASTM D638	42.0	Mpa
Tensile Strength	Tensile Strength	Break	ASTM D638	35.0	Mpa
Flexural Modulus	50.0 mm Span	ASTM D790	2720	Mpa
Flexural Strength	Yield, 50.0 mm Span	ASTM D790	73.0	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Deflection Temperature Under Load?	0.45 MPa, Unannealed, 3.20 mm	ASTM D648	83.0	°C
Deflection Temperature Under Load?	Deflection Temperature Under Load?	1.8 MPa, Unannealed, 3.20 mm	ASTM D648	72.0	°C
Vicat Softening Temperature		ASTM D15255	90.0	°C
Linear thermal expansion coefficient	Flow : -40 to 40°C	ASTM E831	7.9E-5	cm/cm/°C
Linear thermal expansion coefficient	Linear thermal expansion coefficient	Across Flow : -40 to 40°C	ASTM E831	7.9E-5	cm/cm/°C
RTI		UL 746	60.0	°C
RTI Imp		UL 746	60.0	°C
RTI Elec		UL 746	60.0	°C

Fill Analysis	Test Condition	Test Method	Test Result	Unit
Melt Viscosity	200°C, 1000 sec^-1	ASTM D3835	310	Pa·s

Injection	Test Result	Unit
Drying Temperature	80 到 90	°C
Suggested Max Moisture	0.10	%
Processing (Melt) Temp	200 到 220	°C
Mold Temperature	50 到 70	°C
Drying Time	2.0 到 4.0	hr
Suggested Shot Size	50 到 70	%
Rear Temperature	170 到 180	°C
Middle Temperature	195 到 205	°C
Front Temperature	200 到 215	°C
Nozzle Temperature	200 到 220	°C
Back Pressure	0.300 到 0.700	Mpa
Screw Speed	30 到 60	rpm
Vent Depth	0.038 到 0.051	mm

Impact Properties	Test Condition	Test Method	Test Result	Unit
Instrumented Dart Impact	23°C, Total Energy	ASTM D3763	41.0	J

Flammability	Test Condition	Test Method	Test Result	Unit
Flame Rating	2.3 mm	UL 94	V-0
Flame Rating	Flame Rating	2.5 mm	UL 94	5VB

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.