Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | Flow,24hr | ASTM D-955 | 18 | % |
Modeling Shrinkage | Across,Flow,24hr | ASTM D-955 | 27 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Elongation?(Yield) | | ASTM D-638 | 2.2 | % |
Unnotched Izod Impact Strength | 3.18mm | ASTM D-256 | 286 | J/m |
Tensile Strength(Break) | | ASTM D-638 | 39.3 | Mpa |
IZOD Notch Impact Strength | 3.18mm | ASTM D-256 | 58.7 | J/m |
Tensile Modulus | | ASTM D-638 | 3000 | Mpa |
Flexural Modulus | | ASTM D-790 | 2820 | Mpa |
Flexural Strength | | ASTM D-790 | 75.8 | Mpa |
Tensile Strength(Yield) | | ASTM D-638 | 42.7 | Mpa |
Tensile Elongation?(Break) | | ASTM D-638 | 8.6 | % |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Linear thermal expansion coefficient | Flow | ASTM E-831 | 0.000079 | cm/cm/℃ |
Linear thermal expansion coefficient | Transverse | ASTM E-831 | 0.000096 | cm/cm/℃ |
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ASTM D-648 | 97.2 | °C |
Deflection Temperature Under Load? | 1.80MPa,Unannealed | ASTM D-648 | 87.8 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | ASTM D-4496 | 1.0-1.0E+5 | ohms |
Volume Resistivity | | ASTM D-257 | 1E+06 | ohm.cm |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Moisture Absorption | 24hr | ASTM D-570 | 0.20 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.