ABS CYCOLAC™ FR15U BK4051 SABIC INNOVATIVE US
102
- Unit Price:
- $3743 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 20MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:UV resistance Flame retardant
- Application Areas:Electrical applications Automotive Applications small home appliances
- Color:--
- Grade:Injection grade
Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Melt Mass-Flow Rate | 230°C/3.8 kg | ASTM D1238 | 3.3 | g/10 min |
| 220°C/5.0 kg | ISO 1133 | 7.0 | g/10 min | |
| Melt Volume flow Rate | 220°C/10.0 kg | ISO 1133 | 40.0 | cm3/10min |
| Modeling Shrinkage - Flow | 3.20 mm | 内部方法 | 0.50 到 0.70 | % |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Flexural Stress | -- 5, 6 | ISO 178 | 63.0 | Mpa |
| Yield, 50.0 mm Span 4 | ASTM D790 | 67.0 | Mpa | |
| Tensile Modulus | -- 2 | ASTM D638 | 2060 | Mpa |
| -- | ISO 527-2/1 | 2210 | Mpa | |
| Tensile Elongation | Yield 3 | ASTM D638 | 2.4 | % |
| Break 3 | ASTM D638 | 17 | % | |
| Break | ISO 527-2/50 | 22 | % | |
| Flexural Modulus | 50.0 mm Span 4 | ASTM D790 | 2340 | Mpa |
| -- 5 | ISO 178 | 2260 | Mpa | |
| Tensile Strength | Yield 3 | ASTM D638 | 37.0 | Mpa |
| Yield | ISO 527-2/50 | 41.0 | Mpa | |
| Break 3 | ASTM D638 | 30.0 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Vicat Softening Temperature | -- | 93.0 | °C | |
| -- | ISO 306/B50 | 92.0 | °C | |
| Linear thermal expansion coefficient | Flow : -40 to 40°C | ASTM E831 | 9.0E-5 | cm/cm/°C |
| Across Flow : -40 to 40°C | ASTM E831 | 9.2E-5 | cm/cm/°C | |
| Deflection Temperature Under Load? | 0.45 MPa, Unannealed, 3.20 mm | ASTM D648 | 86.0 | °C |
| 1.8 MPa, Unannealed, 3.20 mm | ASTM D648 | 75.0 | °C | |
| RTI | UL 746 | 90.0 | °C | |
| RTI Imp | UL 746 | 85.0 | °C | |
| RTI Elec | UL 746 | 90.0 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Volume Resistivity | IEC 60093 | > 1.0E+14 | ohms·cm | |
| Dielectric Strength | 3.20 mm, in Oil | IEC 60243-1 | 20 | KV/mm |
| Comparative Tracking Index | UL 746 | PLC 1 | ||
| Hot-wire Ignition | UL 746 | PLC 2 | ||
| High Voltage Arc Tracking Rate | UL 746 | PLC 4 | ||
| Arc Resistance | ASTM D495 | PLC 7 | ||
| High Amp Arc Ignition | UL 746 | PLC 4 |
| Fill Analysis | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Melt Viscosity | 200°C, 1000 sec^-1 | ASTM D3835 | 320 | Pa·s |
| Injection | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Drying Temperature | 80 到 90 | °C | ||
| Suggested Max Moisture | 0.10 | % | ||
| Processing (Melt) Temp | 205 到 230 | °C | ||
| Mold Temperature | 50 到 70 | °C | ||
| Drying Time | 2.0 到 4.0 | hr | ||
| Suggested Shot Size | 50 到 70 | % | ||
| Rear Temperature | 170 到 180 | °C | ||
| Middle Temperature | 200 到 210 | °C | ||
| Front Temperature | 205 到 220 | °C | ||
| Nozzle Temperature | 205 到 230 | °C | ||
| Back Pressure | 0.300 到 0.700 | Mpa | ||
| Screw Speed | 30 到 60 | rpm | ||
| Vent Depth | 0.038 到 0.051 | mm |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Instrumented Dart Impact | 23°C, Total Energy | ASTM D3763 | 28.0 | J |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Flame Rating | 1.5 mm | UL 94 | V-0 | |
| 2.8 mm | UL 94 | 5VA |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.