Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Solid Content | | ASTM D-792 | 1.05 | |
| Modeling Shrinkage | flow | ASTM D-955 | 5-8 | in/inE-3 |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Notched Izod Impact Strength | 73F | ASTM D-256 | 5.0 | ft-lb/in |
| Tensile Strength (Yield) | 0.125" | ASTM D-790 | 10500 | psi |
| Flexural Modulus | 0.125" | ASTM D-790 | 325000 | psi |
| Tensile Strength(Yield) | 类型 I, 0.125" | ASTM D-638 | 6600 | psi |
| Tensile Modulus | 类型 I, 0.125" | ASTM D-638 | 305000 | psi |
| Rockwell Hardness | | ASTM D-785 | 105 | R |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Thermal distortion temperature | 264PSi, 0.125",Unannealed | ASTM D-648 | 190 | deg F |
| Thermal distortion temperature | 66PSi, 0.125 | ASTM D-648 | 211 | deg F |
| Thermal distortion temperature | 264PSi, 0.250",Unannealed | ASTM D-648 | 198 | deg F |
| Other | Test Condition | Test Method | Test Result | Unit |
|---|
| Gloss | 60度 | ASTM D-523 | 25 | |
| Physical | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt index | 标称220C/10.0kgf | ASTM D-1238 | 6.0 | g/10min |
| Melt Viscosity | 260℃,1000sec-1 | | 2200 | poise |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
