Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | MD | ASTMD955 | 0.30到0.60 | % |
| Melt Mass-Flow Rate | 220°C/10.0kg | ASTMD1238 | 25 | g/10min |
| Density / Specific Gravity | | ASTMD792 | 1.04 | g/cm³ |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Strength | | ASTMD638 | 47.0 | Mpa |
| Tensile Elongation | Break | ASTMD638 | 35 | % |
| Flexural Modulus | | ASTMD790 | 2300 | Mpa |
| Flexural Strength | | ASTMD790 | 72.0 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 1.8MPa,Unannealed | ASTMD648 | 85.0 | °C |
| Vicat Softening Temperature | | ASTMD15252 | 96.0 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Surface Resistivity | | IEC60093 | >1.0E+14 | ohms |
| Volume Resistivity | | IEC60093 | >1.0E+14 | ohms·cm |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Notched Izod Impact Strength | 3.20mm | ASTMD256 | 350 | J/m |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| UL flame retardant rating | | UL94 | HB | |
| Supplementary information | Test Condition | Test Method | Test Result | Unit |
|---|
| CSAFileNo. | | | LS66457 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
