Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD | ASTMD955 | 0.40to0.70 | % |
Modeling Shrinkage | MD | ISO294-4 | 0.40to0.70 | % |
Melt Mass-Flow Rate | 220°C/10.0kg | ASTMD1238 | 28 | g/10min |
Melt Mass-Flow Rate | 230°C/3.8kg | ASTMD1238 | 8.0 | g/10min |
Melt Mass-Flow Rate | 220°C/10.0kg | ISO1133 | 28 | g/10min |
Apparent Density | | ISO60 | 0.65 | g/cm³ |
Melt Mass-Flow Rate | 220°C/10.0kg | ASTMD1505 | 27.0 | cm3/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Nominalstrainatbreak | | ISO527-22 | 20 | % |
Flexural Modulus | 3.20mm,InjectionMolded | ISO178 | 2400 | Mpa |
Tensile Strength | Break | ASTMD638 | 35.0 | Mpa |
Tensile Strength | Yield | ASTMD638 | 48.0 | Mpa |
Flexural Modulus | | ASTMD790 | 2480 | Mpa |
Flexural Strength | | ASTMD790 | 75.0 | Mpa |
Tensile Elongation | Break | ASTMD638 | 8.7 | % |
Flexural Strength | 3.20mm,InjectionMolded | ISO178 | 70.0 | Mpa |
Tensile Elongation | Yield | ASTMD638 | 2.7 | % |
Tensile Stress | Yield,3.20mm,Injection | ISO527-2/50 | 45.0 | Mpa |
Tensile Stress | Yield,3.20mm,Injection | ISO527-2/100 | 47.0 | Mpa |
Tensile Stress | Yield | ISO527-22 | 48.0 | Mpa |
Tensile Strain | Yield,3.20mm,Injection | ISO527-2/50 | 2.5 | % |
Tensile Strain | Yield,3.20mm,Injection | ISO527-2/100 | 2.6 | % |
Tensile Modulus | 3.20mm,Injection | ISO527-2 | 2340 | Mpa |
Tensile Modulus | | ISO527-22 | 2400 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ASTMD648 | 87.0 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ASTMD648 | 74.0 | °C |
Deflection Temperature Under Load? | 1.8MPa,Annealed | ISO75-2/A | 95.0 | °C |
Deflection Temperature Under Load? | 1.8MPa | ISO75-22 | 95.0 | °C |
Vicat Softening Temperature | | ASTMD15257 | 99.0 | °C |
Vicat Softening Temperature | | ISO306/B50 | 95.0 | °C |
Vicat Softening Temperature | 50N | ISO3062 | 92.0 | °C |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
CharpyNotchedImpactStrength | 23°C | ISO179/1eA2 | 18.0 | kJ/m² |
Charpy impact strength | 23°C | ISO179/1eU2 | NoBreak | |
Charpy Notched Impact Strength | -30°C | ISO179/1eU2 | NoBreak | |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | R-Scale | ASTMD785 | 108 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Burning Rate | 2.00mm | ISO3795 | 60 | mm/min |
Flame Rating | 1.5mm | UL94 | HB | |
Flame Rating | 3.0mm | UL94 | HB | |
Flame Rating (1.60 mm) | 1.50mm,UL | 4.21 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.