Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Density | | ASTM D792/ISO 1183 | 1.05 | |
Melt Mass-Flow Rate | | ASTM D1238/ISO 1133 | 7.0 | g/10min |
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD | ASTMD955 | 0.40到0.60 | % |
Melt Mass-Flow Rate | 220°C/10.0kg | ISO1133 | 7.2 | g/10min |
Melt Volume flow Rate | 220°C/10.0kg | ISO1133 | 7.60 | cm3/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flexural Modulus | | ISO178 | 2500 | Mpa |
Flexural Stress | | ISO178 | 80.2 | Mpa |
Tensile Stress | Yield | ISO527-2/50 | 49.7 | Mpa |
Tensile Elongation | | ASTM D-638 | 50 | % |
IZOD Notch Impact Strength | 23℃ | ASTM D-256 | 333 | J/m |
IZOD Notch Impact Strength | 0℃ | ASTM D-256 | 196 | J/m |
IZOD Notch Impact Strength | -30℃ | ASTM D-256 | 108 | J/m |
Tensile Strength | | ASTM D-638 | 46 | Mpa |
Rockwell Hardness | | ASTM D-785 | 110 | R-Scale |
Flexural Modulus | | ASTM D-790 | 2646 | Mpa |
Flexural Strength | | ASTM D-790 | 74 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 84.0 | °C |
Deflection Temperature Under Load? | | ASTM D-648 | 90 | °C |
Vicat Softening Temperature | | ASTM D-1525 | 113 | °C |
Vicat Softening Temperature | | ISO306/B | 105 | °C |
RTIElec | | UL746 | 60.0 | °C |
Evolution Calendar intelligent importer | | UL746 | 60.0 | °C |
RTI | | UL746 | 60.0 | °C |
Ball PressureTest | | EMAC | 95 | °C |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | R-Sale,2.50mm | | 104 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 1.5mm | UL94 | HB | |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Melt index | | JIS K7210 | 8 | g/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.