Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Density | | ASTM D792/ISO 1183 | 1.05 | |
| Modeling Shrinkage | | ASTM D955 | 0.4-0.6 | % |
| Melt Mass-Flow Rate | | ASTM D1238/ISO 1133 | 1.5 | g/10min |
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | 23℃(73℉) | ASTM D-955 | 0.4-0.6 | % |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Impact Strength | 1/4〃(6.35mm) 23℃(73℉) | ASTM D-256 | 18 | Kgf.cm/cm |
| Flexural Strength | 23℃(73℉) | ASTM D-790 | 2450 | Kgf/cm2 |
| Tensile Strength | 23℃(73℉) | ASTM D-790 | 735 | Kgf/cm2 |
| Tensile Strength | 23℃(73℉) | ASTM D-638 | 460 | Kgf/cm2 |
| Tensile Strength | | ASTM D638/ISO 527 | 470 | kg/cm²(MPa)[Lb/in²] |
| Rockwell Hardness | | ASTM D785 | R-110 | |
| Rockwell Hardness | 23℃(73℉) | ASTM D-785 | 105 | M Scale |
| Flexural Modulus | | ASTM D790/ISO 178 | 780 | kg/cm²(MPa)[Lb/in²] |
| Charpy impact strength | | ASTM D256/ISO 179 | 22 | kg·cm/cm(J/M)ft·lb/in |
| Izod notch impact strength | | ASTM D256/ISO 179 | 20 | kg·cm/cm(J/M)ft·lb/in |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Flammability | FILE NO.E206417(1.59mm) | UL-94 | 1/16"HB | |
| Deflection Temperature Under Load? | 18.6kgf/cm2(264 Psi) | ASTM D-648 | 87 | °C |
| Deflection Temperature Under Load? | 18.6kgf/cm2(264 Psi) | ASTM D-648 | 189 | ℉ |
| Deflection Temperature Under Load? | | ASTM D648/ISO 75 | 87 | ℃（℉） |
| Physical | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt index | 200℃ 5000g | ASTM D-1238 | 1.6 | g/10min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
