PC LEXAN™ 144R-112 SABIC INNOVATIVE NANSHA

Unit Price:
$3742 USD/MT
Packaging Specification:
25 KG/PKG
Supply Quantity:
10MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 2787 3515

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Material Description

Technical Data Sheet

Material Description

Material Properties:Flame retardant transparent
Application Areas:Non specific food Nursing supplies Medical supplies
Color:--
Grade:--

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Moisture Absorption	24 hr	ASTM D570	0.15	%
	Moisture Absorption	Equilibrium, 23°C	ASTM D570	0.35	%
	Moisture Absorption	Moisture Absorption	Equilibrium, 100°C	ASTM D570	0.58	%
Specific Volume		ASTM D792	0.830	cm³/g
Melt Mass-Flow Rate	300°C/1.2 kg	ASTM D1238	11	g/10 min
Modeling Shrinkage - Flow	3.20 mm	内部方法	0.50 到 0.70	%

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Tensile Strength	Yield	ASTM D638	62.0	Mpa
Tensile Strength	Tensile Strength	Break	ASTM D638	68.0	Mpa
Tensile Elongation	Yield	ASTM D638	7.0	%
Tensile Elongation	Tensile Elongation	Break	ASTM D638	130	%
Taber Abrasion Resistance	1000 Cycles, 1000 g, CS-17 Wheel	ASTM D1044	10.0	mg
Flexural Modulus	50.0 mm Span	ASTM D790	2340	Mpa
Flexural Strength	Yield, 50.0 mm Span	ASTM D790	97.0	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
RTI		UL 746	130	°C
RTI Imp		UL 746	130	°C
RTI Elec		UL 746	130	°C
Specific Heat		ASTM C351	1250	J/kg/°C
Thermal Conductivity		ASTM C177	0.19	W/m/K
Deflection Temperature Under Load?	0.45 MPa, Unannealed, 6.40 mm	ASTM D648	137	°C
Deflection Temperature Under Load?	Deflection Temperature Under Load?	1.8 MPa, Unannealed, 6.40 mm	ASTM D648	132	°C
Coefficient of Linear Thermal Expansion (Flow)	-40 to 95°C	ASTM E831	6.8E-5	cm/cm/°C
Vicat Softening Temperature		ASTM D15255	154	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
High Amp Arc Ignition		UL 746	PLC 1
High Voltage Arc Tracking Rate		UL 746	PLC 2
Comparative Tracking Index		UL 746	PLC 2
Hot-wire Ignition		UL 746	PLC 2
Dielectric Constant	60 Hz	ASTM D150	3.17
	Dielectric Constant	50 kHz	ASTM D150	3.17
	Dielectric Constant	Dielectric Constant	1 MHz	ASTM D150	2.96
Volume Resistivity		ASTM D257	> 1.0E+17	ohms·cm
Dissipation Factor?	50 Hz	ASTM D150	9.0E-4
	Dissipation Factor?	60 Hz	ASTM D150	9.0E-4
	Dissipation Factor?	Dissipation Factor?	1 MHz	ASTM D150	0.010
Dielectric Strength	3.20 mm, in Air	ASTM D149	15	KV/mm

Injection	Test Result	Unit
Drying Time	3.0 到 4.0	hr
Suggested Shot Size	40 到 60	%
Rear Temperature	270 到 295	°C
Middle Temperature	280 到 305	°C
Front Temperature	295 到 315	°C
Nozzle Temperature	290 到 310	°C
Back Pressure	0.300 到 0.700	Mpa
Screw Speed	40 到 70	rpm
Vent Depth	0.025 到 0.076	mm
Drying Temperature	120	°C
Suggested Max Moisture	0.020	%
Processing (Melt) Temp	295 到 315	°C
Mold Temperature	70 到 95	°C

Impact Properties	Test Condition	Test Method	Test Result	Unit
Gardner Impact	23°C	ASTM D3029	169	J
Unnotched Izod Impact Strength	23°C	ASTM D4812	3200	J/m
Tensile Impact Strength		ASTM D1822	577	kJ/m²

hardness	Test Condition	Test Method	Test Result	Unit
Rockwell Hardness	M-Scale	ASTM D785	70
Rockwell Hardness	Rockwell Hardness	R-Scale	ASTM D785	118

optical performance	Test Condition	Test Method	Test Result	Unit
Refractive index of light		ASTM D542	1.586
Haze	2540 µm	ASTM D1003	1.0	%
Transmittance	2540 µm	ASTM D1003	88.0	%

Flammability	Test Condition	Test Method	Test Result	Unit
Oxygen Index		ASTM D2863	25	%
Flame Rating	1.5 mm	UL 94	HB

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.