LCP VECTRA® A950 CELANESE USA

Unit Price:
$14083 USD/MT
Packaging Specification:
25KG/PKG
Supply Quantity:
101MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	Across Flow	ISO 294-4	0.70	%
Modeling Shrinkage	Modeling Shrinkage	流量	ISO 294-4	0.0	%
Moisture Absorption	Saturation, 23°C	ISO 62	6.0E-3	%
Moisture Absorption	Moisture Absorption	Equilibrium, 23°C, 50% RH	ISO 62	3.0E-3	%

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Tensile Stress	Break	ISO 527-2/1A/5	200	Mpa
Tensile Strain	Break	ISO 527-2/1A/5	3.1	%
Tensile Creep Modulus	1 hr	ISO 899-1	9000	Mpa
Tensile Creep Modulus	Tensile Creep Modulus	1000 hr	ISO 899-1	6600	Mpa
Tensile Modulus		ISO 527-2/1A	11700	Mpa
Flexural Modulus	23°C	ISO 178	9100	Mpa
Flexural Stress	23°C	ISO 178	158	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Vicat Softening Temperature		ISO 306/B50	145	°C
Melting Temperature		ISO 11357-3	280	°C
Deflection Temperature Under Load?	1.8 MPa, Unannealed	ISO 75-2/A	193	°C
Deflection Temperature Under Load?	Deflection Temperature Under Load?	8.0 MPa, Unannealed	ISO 75-2/C	94.0	°C
Linear thermal expansion coefficient	Flow	ISO 11359-2	4.0E-6	cm/cm/°C
Linear thermal expansion coefficient	Linear thermal expansion coefficient	Across Flow	ISO 11359-2	3.8E-5	cm/cm/°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dissipation Factor?	100 Hz	IEC 60250	0.016
Dissipation Factor?	Dissipation Factor?	1 MHz	IEC 60250	0.020
Surface Resistivity		IEC 60093	1.0E+14	ohms
Volume Resistivity		IEC 60093	1.0E+15	ohms·cm
Dielectric Strength		IEC 60243-1	47	KV/mm
Relative Permittivity	100 Hz	IEC 60250	3.20
Relative Permittivity	Relative Permittivity	1 MHz	IEC 60250	3.00
Comparative Tracking Index	--	IEC 60112	150	V
Comparative Tracking Index	Comparative Tracking Index	Solution B	IEC 60112	100	V

Injection	Test Result	Unit
Drying Temperature	150	°C
Suggested Max Moisture	0.010	%
Processing (Melt) Temp	285 到 295	°C
Mold Temperature	80 到 120	°C
Drying Time	4.0 到 6.0	hr
Rear Temperature	270 到 280	°C
Middle Temperature	275 到 285	°C
Front Temperature	280 到 290	°C
Nozzle Temperature	290 到 300	°C
Back Pressure	< 3.00	Mpa
Hopper Temperature	20 到 30	°C
Injection Rate	快速

Impact Properties	Test Condition	Test Method	Test Result	Unit
Notched Izod impact strength	23°C	ISO 180/1U	250	kJ/m²
Charpy Unnotched Impact Strength	-30°C	ISO 179/1eU	53	kJ/m²
Charpy Unnotched Impact Strength	Charpy Unnotched Impact Strength	23°C	ISO 179/1eU	270	kJ/m²

Flammability	Test Condition	Test Method	Test Result	Unit
Flame Rating		UL 94	V-0

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.