Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD | ASTMD955 | 0.40 | % |
Modeling Shrinkage | TD | ASTMD955 | 1.4 | % |
Modeling Shrinkage | TD | ISO294-4 | 1.2 | % |
Modeling Shrinkage | MD | ISO294-4 | 0.40 | % |
Moisture Absorption | Saturation,23°C | ISO62 | 0.80 | % |
Moisture Absorption | Equilibrium,23°C,50%RH | ISO62 | 0.20 | % |
Density / Specific Gravity | | ASTMD792 | 1.58 | g/cm³ |
Density / Specific Gravity | | ISO1183 | 1.58 | g/cm³ |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flexural Stress | 23°C | ISO178 | 160 | Mpa |
Tensile Stress | Break | ISO527-2/1A/5 | 106 | Mpa |
Tensile Strain | Break | ISO527-2/1A/5 | 2.0 | % |
Tensile Modulus | | ISO527-2/1A/1 | 8600 | Mpa |
Flexural Modulus | 23°C | ISO178 | 8700 | Mpa |
Tensile Strength | Break,-40°C | ASTMD638 | 159 | Mpa |
Tensile Strength | Break,23°C | ASTMD638 | 110 | Mpa |
Tensile Strength | Break,71°C | ASTMD638 | 68.9 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Linear thermal expansion coefficient | MD | ISO11359-2 | 2.5E-05 | cm/cm/°C |
Linear thermal expansion coefficient | TD | ISO11359-2 | 1.2E-04 | cm/cm/°C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ASTMD648 | 163 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 160 | °C |
Peak Melting Temperature | | ASTMD3418 | 166 | °C |
Melting Temperature | | ISO11357-3 | 165 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Volume Resistivity | | ASTMD257 | 1.4E+14 | ohms·cm |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Unnotched Impact Strength | -30°C | ISO179/1eU | 35 | kJ/m² |
Charpy Unnotched Impact Strength | 23°C | ISO179/1eU | 25 | kJ/m² |
Charpy Notched Impact Strength | 23°C | ISO179/1eA | 6.4 | kJ/m² |
Notched Izod Impact Strength | 23°C | ISO180/1A | 6.0 | kJ/m² |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.