PPO NORYL GTX™ GTX810-51511OD SABIC INNOVATIVE US

Unit Price:
$5034 USD/MT
Packaging Specification:
25KG/PKG
Supply Quantity:
10MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	Flow : 3.20 mm	内部方法	0.60 到 0.80	%
Modeling Shrinkage	Modeling Shrinkage	Across Flow : 3.20 mm	内部方法	0.65 到 0.85	%
Moisture Absorption	24 hr, 50% RH	ASTM D570	0.50	%
Moisture Absorption	Moisture Absorption	Equilibrium, 50% RH	ASTM D570	1.0	%

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Tensile Elongation	Break	ASTM D638	10	%
Flexural Modulus	100 mm Span	ASTM D790	3960	Mpa
Flexural Strength	Yield, 100 mm Span	ASTM D790	155	Mpa
Tensile Strength	Yield	ASTM D638	89.0	Mpa
Tensile Strength	Tensile Strength	Break	ASTM D638	88.0	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Vicat Softening Temperature		ASTM D15253	240	°C
Coefficient of Linear Thermal Expansion (Flow)	-20 to 150°C	ASTM E831	4.0E-5 到 5.0E-5	cm/cm/°C
RTI		UL 746	50.0	°C
RTI Imp		UL 746	50.0	°C
RTI Elec		UL 746	50.0	°C
Deflection Temperature Under Load?	0.45 MPa, Unannealed, 6.40 mm	ASTM D648	245	°C
Deflection Temperature Under Load?	Deflection Temperature Under Load?	1.8 MPa, Unannealed, 6.40 mm	ASTM D648	210	°C

Electrical performance	Test Method	Test Result
Comparative Tracking Index	UL 746	PLC 3
Hot-wire Ignition	UL 746	PLC 0
High Amp Arc Ignition	UL 746	PLC 0
High Voltage Arc Tracking Rate	UL 746	PLC 3
Arc Resistance	ASTM D495	PLC 6

Injection	Test Result	Unit
Drying Time	3.0 到 4.0	hr
Suggested Shot Size	30 到 50	%
Rear Temperature	265 到 305	°C
Middle Temperature	270 到 305	°C
Front Temperature	275 到 305	°C
Nozzle Temperature	280 到 305	°C
Back Pressure	0.300 到 1.40	Mpa
Screw Speed	20 到 100	rpm
Vent Depth	0.013 到 0.038	mm
Drying Temperature	95 到 105	°C
Suggested Max Moisture	0.070	%
Processing (Melt) Temp	280 到 305	°C
Mold Temperature	75 到 120	°C

hardness	Test Condition	Test Method	Test Result	Unit
Rockwell Hardness	R-Scale	ASTM D785	119

Flammability	Test Condition	Test Method	Test Result	Unit
Flame Rating	1.5 mm	UL 94	HB

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.