Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD:3.20mm | 内部方法 | 0.50to0.70 | % |
Modeling Shrinkage | TD2 | 内部方法 | 0.50to0.70 | % |
Outdoor Suitability | | UL746C | f1 | |
Density / Specific Gravity | | ASTMD792 | 1.10 | g/cm³ |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flexural Strength | Yield,100mmSpan | ASTMD790 | 82.7 | Mpa |
Tensile Elongation | Break | ASTMD638 | 25 | % |
Tensile Elongation | Yield | ASTMD638 | 6.5 | % |
Tensile Strength | Yield | ASTMD638 | 57.9 | Mpa |
Tensile Strength | Break | ASTMD638 | 46.9 | Mpa |
Flexural Modulus | 100mmSpan | ASTMD790 | 2310 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
RTIElec | | UL746 | 95.0 | °C |
Evolution Calendar intelligent importer | | UL746 | 80.0 | °C |
RTIStr | | UL746 | 95.0 | °C |
Deflection Temperature Under Load? | 0.45MPa,Unannealed,6.40mm | ASTMD648 | 102 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed,6.40mm | ASTMD648 | 92.8 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | | ASTMD257 | >1.0E+15 | ohms |
Dielectric Constant | 50Hz | ASTMD150 | 2.66 | |
Dielectric Constant | 60Hz | ASTMD150 | 2.66 | |
Dielectric Constant | 1MHz | ASTMD150 | 2.57 | |
Volume Resistivity | | ASTMD257 | 3.1E+16 | ohms·cm |
Arc Resistance | | ASTMD495 | PLC7 | |
High Voltage Arc Tracking Rate | HVTR | UL746 | PLC4 | |
Dissipation Factor? | 50Hz | ASTMD150 | 6E-03 | |
Dissipation Factor? | 60Hz | ASTMD150 | 6E-03 | |
Dissipation Factor? | 1MHz | ASTMD150 | 2.6E-03 | |
Dielectric Strength | 3.20mm,inOil | ASTMD149 | 18 | KV/mm |
Comparative Tracking Index | CTI | UL746 | PLC1 | |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Instrumented Dart Impact | -30°C,EnergyatPeakLoad | ASTMD3763 | 16.3 | J |
Instrumented Dart Impact | 23°C,EnergyatPeakLoad | ASTMD3763 | 40.7 | J |
Notched Izod Impact Strength | -30°C | ASTMD256 | 91 | J/m |
Notched Izod Impact Strength | 23°C | ASTMD256 | 260 | J/m |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 1.5mm | UL94 | V-1 | |
UL flame retardant rating | 6.0mm | UL94 | V-0 | |
Radiant Panel Listing | UL | | YES | |
Oxygen Index | | ASTMD2863 | 33 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.