PPO NORYL™ SE1X-701 SABIC INNOVATIVE NANSHA
125
- Unit Price:
- $4791 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 35MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515
serv********
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:High temperature resistan Hydrolysis resistance
- Application Areas:Electronic and electrical Mechanical component cove Household products
- Color:--
- Grade:Injection grade
Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Modeling Shrinkage | Flow : 3.20 mm | 内部方法 | 0.50 到 0.70 | % |
| Across Flow 2 | 内部方法 | 0.50 到 0.70 | % | |
| Moisture Absorption | 24 hr | ASTM D570 | 0.060 | % |
| Outdoor Suitability | UL 746C | f1 |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Flexural Modulus | 100 mm Span | ASTM D790 | 2500 | Mpa |
| Flexural Strength | Yield, 100 mm Span | ASTM D790 | 102 | Mpa |
| Tensile Elongation | Yield | ASTM D638 | 8.1 | % |
| Break | ASTM D638 | 20 | % | |
| Tensile Strength | Yield | ASTM D638 | 67.0 | Mpa |
| Break | ASTM D638 | 53.0 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Deflection Temperature Under Load? | 0.45 MPa, Unannealed, 6.40 mm | ASTM D648 | 126 | °C |
| 1.8 MPa, Unannealed, 6.40 mm | ASTM D648 | 117 | °C | |
| RTI | UL 746 | 110 | °C | |
| RTI Imp | UL 746 | 105 | °C | |
| RTI Elec | UL 746 | 110 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Surface Resistivity | ASTM D257 | > 1.0E+15 | ohms | |
| Dielectric Constant | 60 Hz | ASTM D150 | 2.52 | |
| 50 kHz | ASTM D150 | 2.52 | ||
| 1 MHz | ASTM D150 | 2.46 | ||
| Volume Resistivity | ASTM D257 | 2.3E+16 | ohms·cm | |
| Dissipation Factor? | 50 Hz | ASTM D150 | 3.4E-3 | |
| 60 Hz | ASTM D150 | 3.4E-3 | ||
| 1 MHz | ASTM D150 | 2.1E-3 | ||
| Dielectric Strength | 3.20 mm, in Oil | ASTM D149 | 18 | KV/mm |
| Comparative Tracking Index | UL 746 | PLC 1 | ||
| High Voltage Arc Tracking Rate | UL 746 | PLC 4 | ||
| Arc Resistance | ASTM D495 | PLC 6 |
| Injection | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Drying Time | 3.0 到 4.0 | hr | ||
| Suggested Shot Size | 30 到 70 | % | ||
| Rear Temperature | 250 到 300 | °C | ||
| Middle Temperature | 260 到 305 | °C | ||
| Front Temperature | 270 到 310 | °C | ||
| Nozzle Temperature | 280 到 310 | °C | ||
| Back Pressure | 0.300 到 0.700 | Mpa | ||
| Screw Speed | 20 到 100 | rpm | ||
| Drying Temperature | 105 到 110 | °C | ||
| Suggested Max Moisture | 0.020 | % | ||
| Processing (Melt) Temp | 280 到 310 | °C | ||
| Mold Temperature | 75 到 105 | °C |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Instrumented Dart Impact | -30°C, Energy at Peak | ASTM D3763 | 32.0 | J |
| 23°C, Energy at Peak | ASTM D3763 | 51.0 | J |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Radiant Panel Listing 6 | RP100 | |||
| Flame Rating | 1.5 mm | UL 94 | V-1 | |
| 6.0 mm | UL 94 | V-0 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.