Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | MD3 | 内部方法 | 1.0到1.4 | % |
| Modeling Shrinkage | MD4 | 内部方法 | 0.80到1.1 | % |
| Modeling Shrinkage | TD3 | 内部方法 | 1.2到1.6 | % |
| Modeling Shrinkage | TD4 | 内部方法 | 0.90到1.3 | % |
| Moisture Absorption | 24hr | ASTMD570 | 0.080 | % |
| Melt Volume flow Rate | 250°C/5.0kg | ISO1133 | 8.00 | cm3/10min |
| Specific Volume | | ASTMD792 | 0.750 | cm³/g |
| Outdoor Suitability | | UL746C | f2 | |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Flexural Strength | Yield,50.0mmSpan | ASTMD790 | 82.7 | Mpa |
| Flexural Strength | Break,50.0mmSpan | ASTMD790 | 82.7 | Mpa |
| Tensile Strength | Yield | ASTMD638 | 48.3 | Mpa |
| Tensile Strength | Break | ASTMD638 | 48.3 | Mpa |
| Tensile Elongation | Break | ASTMD638 | 110 | % |
| Flexural Modulus | 50.0mmSpan | ASTMD790 | 2070 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| RTI | | UL746 | 140 | °C |
| RTIElec | | UL746 | 120 | °C |
| Evolution Calendar intelligent importer | | UL746 | 120 | °C |
| Deflection Temperature Under Load? | 0.45MPa,Unannealed,6.40mm | ASTMD648 | 138 | °C |
| Deflection Temperature Under Load? | 1.8MPa,Unannealed,6.40mm | ASTMD648 | 98.9 | °C |
| Linear thermal expansion coefficient | MD：-40to40°C | ASTME831 | 9.2E-05 | cm/cm/°C |
| Linear thermal expansion coefficient | MD：60to138°C | ASTME831 | 1.2E-04 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric Strength | 1.60mm,inOil | ASTMD149 | 25 | KV/mm |
| Dielectric Strength | 3.20mm,inAir | ASTMD149 | 19 | KV/mm |
| Dielectric Strength | 3.20mm,inOil | ASTMD149 | 19 | KV/mm |
| Dielectric Constant | 100Hz | ASTMD150 | 3.20 | |
| Dielectric Constant | 1MHz | ASTMD150 | 3.20 | |
| Volume Resistivity | | ASTMD257 | >1.2E+16 | ohms·cm |
| Dissipation Factor? | 100Hz | ASTMD150 | 3E-03 | |
| Dissipation Factor? | 1MHz | ASTMD150 | 0.030 | |
| Comparative Tracking Index | CTI | UL746 | PLC2 | |
| Hot-wire Ignition | HWI | UL746 | PLC2 | |
| Arc Resistance | | ASTMD495 | PLC6 | |
| High Amp Arc Ignition | HAI | UL746 | PLC3 | |
| High Voltage Arc Tracking Rate | HVTR | UL746 | PLC3 | |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Gardner Impact | 23°C7 | ASTMD3029 | 43.4 | J |
| Gardner Impact | 23°C | ASTMD3029 | 43.4 | J |
| Unnotched Izod Impact Strength | 23°C | ASTMD4812 | 3200 | J/m |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Rockwell Hardness | R-Scale | ASTMD785 | 117 | |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| Oxygen Index | | ASTMD2863 | 30 | % |
| UL flame retardant rating | 0.46mm | UL94 | HB | |
| UL flame retardant rating | 0.64mm | UL94 | V-0 | |
| UL flame retardant rating | 3.0mm | UL94 | 5VA | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
