ABS/PA Terblend®N NM-11 INEOS STYRO KOREA

Unit Price:
$4916 USD/MT
Packaging Specification:
25KG/PKG
Supply Quantity:
10MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage		ISO294-4	0.80	%
Moisture Absorption	Equilibrium,23°C,50%RH	ISO62	1.2	%
Melt Volume flow Rate	240°C/10.0kg	ISO1133	30.0	cm3/10min

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Flexural Stress		ISO178	62.0	Mpa
Tensile Stress	Yield,23°C	ISO527-2	43.0	Mpa
Tensile Strain	Yield,23°C	ISO527-2	3.5	%
Tensile Modulus		ISO527-2	2000	Mpa
Flexural Modulus		ISO178	1800	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Vicat Softening Temperature	--	ISO306/A50	160	°C
Vicat Softening Temperature	Vicat Softening Temperature	--	ISO306/B50	102	°C
Linear thermal expansion coefficient	MD	ISO11359-2	1E-04	cm/cm/°C
Heat Deflection Temperature	0.45MPa,Annealed	ISO75-2/B	85.0	°C
Heat Deflection Temperature	Heat Deflection Temperature	1.8MPa,Annealed	ISO75-2/A	65.0	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dissipation Factor?	1MHz	IEC60250	0.015
Relative Permittivity	1MHz	IEC60250	2.90
Surface Resistivity		IEC60093	1E+14	ohms
Volume Resistivity		IEC60093	>1.0E+15	ohms·cm

Film	Test Condition	Test Method	Test Result	Unit
Elongation - MD	Break	ISO527-3	>50	%

Impact Properties	Test Condition	Test Method	Test Result	Unit
Charpy Unnotched Impact Strength	-30°C	ISO179	无断裂
Charpy Unnotched Impact Strength	Charpy Unnotched Impact Strength	23°C	ISO179	无断裂

hardness	Test Condition	Test Method	Test Result	Unit
Ball Indentation Hardness		ISO2039-1	86.0	Mpa

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.