Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | MD | 内部方法 | 0.10到0.40 | % |
| Moisture Absorption | 23°C,24hr | ISO62 | 0.20 | % |
| Modeling Shrinkage (Equil,65%RH) | | 内部方法 | 1.9 | % |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Flexural Stress | | ISO178 | 285 | Mpa |
| Tensile Stress | Break | ISO527-2 | 190 | Mpa |
| Tensile Strain | Break | ISO527-2 | 2.0 | % |
| Tensile Modulus | | ISO527-2 | 11500 | Mpa |
| Flexural Modulus | | ISO178 | 11500 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 230 | °C |
| Linear thermal expansion coefficient | MD | ISO11359-2 | 1.8E-05 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric Strength | | IEC60243-1 | 30 | KV/mm |
| Comparative Tracking Index | | IEC60112 | 400 | V |
| Dielectric Constant | 110Hz | IEC60250 | 3.90 | |
| Volume Resistivity | | IEC60093 | 1E+13 | ohms·cm |
| Dissipation Factor? | 110Hz | IEC60250 | 0.010 | |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Unnotched Izod Impact Strength | | ASTMD256 | 460 | J/m |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| Oxygen Index | | ISO4589-2 | 25 | % |
| Flame Rating | | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
