Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Moisture Absorption | 24hr | ASTMD570 | <0.030 | % |
| Melt Mass-Flow Rate | 372°C/5.0kg | ASTMD3307,ISO12086 | 5.0 | g/10min |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Strength | 23°C | ASTMD3307,ISO12086 | 29.0 | Mpa |
| Tensile Elongation | Break,23°C | ASTMD3307,ISO12086 | 300 | % |
| Flexural Modulus | 23°C | ASTMD790,ISO178 | 551 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Melting temperature | | ASTMD4591 | 305 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric Strength | 0.250mm2 | ASTMD149 | 80 | KV/mm |
| Dielectric Strength | 0.250mm | IEC60243-1 | 80 | KV/mm |
| Dissipation Factor? | 1MHz | ASTMD150,IEC60250 | <2.0E-4 | |
| Dielectric Constant | 1MHz | ASTMD150,IEC60250 | 2.03 | |
| Volume Resistivity | | ASTMD257,ISO1325 | 1E+18 | ohms·cm |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Shore Hardness | Shore D | ASTMD2240,ISO868 | 55 | |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| Oxygen Index | | ASTMD2863,ISO4589-2 | >95 | % |
| Flame Rating | | UL94 | V-0 | |
| Supplementary information | Test Condition | Test Method | Test Result | Unit |
|---|
| CriticalShearRate | 372°C | | 21.0 | sec^-1 |
| MITFoldingEndurance4 | 200.0µm | ASTMD2176 | 5E+04 | cycles |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
