Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Moisture Absorption | 24hr | ASTMD570 | <0.030 | % |
| Melt Mass-Flow Rate | 372°C/5.0kg | ASTMD3307 | 42 | g/10min |
| Melt Mass-Flow Rate | 372°C/5.0kg | ISO12086 | 42 | g/10min |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Stress | Yield,23°C | ISO12086 | 25.0 | Mpa |
| Tensile Strain | Break,23°C | ISO12086 | 350 | % |
| Tensile Elongation | Break,23°C | ASTMD3307 | 350 | % |
| Flexural Modulus | 23°C | ASTMD790 | 690 | Mpa |
| Flexural Modulus | 23°C | ISO178 | 690 | Mpa |
| Tensile Strength | 23°C | ASTMD3307 | 25.0 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Melting temperature | | ASTMD4591 | 305 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric Constant | 1MHz | ASTMD150 | 2.03 | |
| Dielectric Constant | 1MHz | IEC60250 | 2.03 | |
| Volume Resistivity | | ASTMD257 | 1E+18 | ohms·cm |
| Volume Resistivity | | ISO1325 | 1E+18 | ohms·cm |
| Dissipation Factor? | 1MHz | ASTMD150 | <2.0E-4 | |
| Dissipation Factor? | 1MHz | IEC60250 | <2.0E-4 | |
| Dielectric Strength | 0.250mm | ASTMD149 | 80 | KV/mm |
| Electric strength | 0.250mm | IEC60243-1 | 80 | KV/mm |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Shore Hardness | Shore D | ASTMD2240 | 55 | |
| Shore Hardness | Shore D | ISO868 | 55 | |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| Flame Rating | | UL94 | V-0 | |
| Oxygen Index | | ASTMD2863 | >95 | % |
| Oxygen Index | | ISO4589-2 | >95 | % |
| Supplementary information | Test Condition | Test Method | Test Result | Unit |
|---|
| CriticalShearRate | 372°C | | 12.0 | sec^-1 |
| MITFoldingEndurance4 | 200.0µm | ASTMD2176 | 4E+03 | cycles |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
