TPX TPX™ RT31 MITSUI CHEM JAPAN

Unit Price:
$13463 USD/MT
Packaging Specification:
25KG/PKG
Supply Quantity:
10MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Melting Temperature		MCI方法	235	°C
Melt index		ASTM D-1238	21	g/10min

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Notched Izod Impact Strength		ASTM D-256	10	KJ/m
Flexural Strength		ASTM D-790	51	Mpa
Rockwell Hardness		ASTM D-785	R90
Tensile Modulus		ASTM D-638	1865	Mpa
Tensile Strength		ASTM D-638	20	Mpa
Tensile Elongation	Break	ASTM D-638	32	%
Tensile Strength(Yield)		ASTM D-638	26	Mpa
Elastic modulus		ASTM D-790	1765	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Specific Heat		ASTM C-351	0.47	cal/g℃
Burning Rate		ASTM D-635	2.54	cm/min
Thermal Conductivity		ASTM BS-847A	4*10	calcm/seccm
Deflection Temperature Under Load?	4.6kg/cm2	ASTM D-648	90	°C
Linear expansion coefficient		ASTM D-696	1.17*10	1/℃
Vicat Softening Temperature		ASTM D-1525	177	°C
Modeling Shrinkage	Across Flow/Across Flow	MCI方法	2.1/1.7	%

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dielectric Strength		ASTM D-149	65	KV/mm
Volume Resistivity		ASTM D-257	>10	Ωcm
Dissipation Factor?	23℃, 1MHz	ASTM D-150	0.0007
Moisture Absorption	24hr	ASTM D-570	0.01	%
Dielectric Constant	100～1MHz	ASTM D-150	2.12

Other	Test Method	Test Result	Unit
Transmittance	ASTM D-1746	93	%
Haze	ASTM D-1746	2.6	%
Refractive index of light	ASTM D-542	1.463	ND

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.