Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | MD | ASTMD955 | 0.50to0.70 | % |
Density / Specific Gravity | | ASTMD792 | 1.18 | g/cm³ |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength | Break,23°C | ASTMD638 | 52.0 | Mpa |
Tensile Strength | Yield,23°C | ASTMD638 | 43.0 | Mpa |
Tensile Stress | Yield,23°C | ISO527-2 | 44.0 | Mpa |
Tensile Stress | Break,23°C | ISO527-2 | 49.0 | Mpa |
Tensile Strain | Yield,23°C | ISO527-2 | 7.0 | % |
Tensile Strain | Break,23°C | ISO527-2 | 150 | % |
Flexural Stress | 23°C | ISO178 | 60.0 | Mpa |
Tensile Modulus | 23°C | ASTMD638 | 1580 | Mpa |
Tensile Modulus | 23°C | ISO527-2 | 1600 | Mpa |
Tensile Elongation | Yield,23°C | ASTMD638 | 7.0 | % |
Tensile Elongation | Break,23°C | ASTMD638 | 210 | % |
Flexural Modulus | 23°C | ASTMD790 | 1580 | Mpa |
Flexural Modulus | 23°C | ISO178 | 1500 | Mpa |
Flexural Strength | Yield,23°C | ASTMD790 | 64.0 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ASTMD648 | 94.0 | °C |
Deflection Temperature Under Load? | 1.8MPa,Unannealed | ASTMD648 | 81.0 | °C |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Notched Izod Impact Strength | 23°C | ASTMD256 | 860 | J/m |
Notched Izod Impact Strength | -40°C | ISO180 | 11 | kJ/m² |
Notched Izod Impact Strength | 23°C | ISO180 | 83 | kJ/m² |
Notched Izod Impact Strength | 23°C | ASTMD4812 | NoBreak | |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Rockwell Hardness | R-Sale,23°C | ASTMD785 | 111 | |
optical performance | Test Condition | Test Method | Test Result | Unit |
---|
Haze | | ASTMD1003 | <1.0 | % |
Transmittance | Total | ASTMD1003 | 91.0 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.