Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | TD | ISO294-4 | 1.6 | % |
Modeling Shrinkage | MD | ISO294-4 | 1.7 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Stress | Break | ISO527-2 | 30.0 | Mpa |
Tensile Stress | 10%Strain | ISO527-2 | 8.40 | Mpa |
Tensile Stress | 50%Strain | ISO527-2 | 14.0 | Mpa |
Tensile Strain | Break | ISO527-2 | >300 | % |
Nominal Tensile Strain at Break | | ISO527-2 | 350 | % |
Tensile Modulus | | ISO527-2 | 100 | Mpa |
Flexural Modulus | | ISO178 | 100 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Linear thermal expansion coefficient | MD | ISO11359-2 | 2.1E-04 | cm/cm/°C |
Linear thermal expansion coefficient | TD | ISO11359-2 | 2E-04 | cm/cm/°C |
Melting Temperature | | ISO11357-3 | 206 | °C |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Shore Hardness | Shore D | ISO868 | 44 | |
Shore Hardness | Shore D,15sec | ISO868 | 41 | |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
FMVSS Flammability | | FMVSS302 | B | |
Burning Rate | 1.00mm | ISO3795 | <100 | mm/min |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.