Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Moisture Absorption | Saturation,23°C | ISO62 | 0.80 | % |
Apparent Density | | ISO60 | 0.65 | g/cm³ |
Melt Volume flow Rate | 230°C/2.16kg | ISO1133 | 41.0 | cm3/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Nominal Tensile Strain at Break | | ISO527-2 | 900 | % |
Tensile Modulus | | ISO527-2 | 25.0 | Mpa |
Tensile Stress | Break | ISO527-2 | 16.0 | Mpa |
Tensile Stress | 5.0%Strain | ISO527-2 | 1.20 | Mpa |
Tensile Stress | 10%Strain | ISO527-2 | 2.10 | Mpa |
Tensile Stress | 50%Strain | ISO527-2 | 4.40 | Mpa |
Tensile Stress | 100%Strain | ISO527-2 | 5.10 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Linear thermal expansion coefficient | MD | ISO11359-2 | 2.2E-04 | cm/cm/°C |
Linear thermal expansion coefficient | TD | ISO11359-2 | 2.2E-04 | cm/cm/°C |
Melting Temperature | | ISO11357-3 | 180 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Volume Resistivity | | IEC60093 | 5E+14 | ohms·cm |
hardness | Test Condition | Test Method | Test Result | Unit |
---|
Shore Hardness | Shore D,3sec | ISO868 | 25 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.