TPEE BEXLOY® 5526 DUPONT TAIWAN

Unit Price:
$9083 USD/MT
Packaging Specification:
25KG/PKG
Supply Quantity:
18MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	TD	ISO294-4	1.4	%
Modeling Shrinkage	Modeling Shrinkage	MD	ISO294-4	1.4	%
Moisture Absorption	23°C,24hr	ISO62	0.60	%
	Moisture Absorption	Saturation,23°C,2.00mm	ISO62	0.60	%
	Moisture Absorption	Moisture Absorption	Equilibrium,23°C,2.00mm,50%RH	ISO62	0.20	%
Melt Mass-Flow Rate		ISO1133	18	g/10min
MediumDensity			1.04	g/cm³
SpecificHeatCapacityofMelt			2110	J/kg/°C
ThermalConductivityofMelt			0.19	W/m/K
Melt Volume flow Rate	220°C/2.16kg	ISO1133	17.5	cm3/10min

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Tensile Creep Modulus	1000hr	ISO899-1	130	Mpa
Tensile Creep Modulus	1hr	ISO899-1	170	Mpa
Tensile Stress	Yield	ISO527-2	15.0	Mpa
	Tensile Stress	Break	ISO527-2	40.0	Mpa
		Tensile Stress	5.0%Strain	ISO527-2	6.90	Mpa
			Tensile Stress	10%Strain	ISO527-2	11.0	Mpa
			Tensile Stress	Tensile Stress	50%Strain	ISO527-2	14.0	Mpa
Tensile Strain	Yield	ISO527-2	35	%
Tensile Strain	Tensile Strain	Break	ISO527-2	>300	%
Tensile Modulus		ISO527-2	190	Mpa
Flexural Modulus		ISO178	200	Mpa
Abrasion Resistance		ISO4649	120	mm³
Nominal Tensile Strain at Break		ISO527-2	780	%

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Deflection Temperature Under Load?	0.45MPa,Unannealed	ISO75-2/B	65.0	°C
Deflection Temperature Under Load?	Deflection Temperature Under Load?	1.8MPa,Unannealed	ISO75-2/A	45.0	°C
Brittleness Temperature		ISO974	-98.0	°C
Vicat Softening Temperature	--	ISO306/A50	180	°C
Vicat Softening Temperature	Vicat Softening Temperature	--	ISO306/B50	75.0	°C
Glass Transition Temperature		ISO11357-2	-20.0	°C
Melting Temperature		ISO11357-3	203	°C
Linear thermal expansion coefficient	MD：--	ISO11359-2	2E-04	cm/cm/°C
	Linear thermal expansion coefficient	MD：-40to23°C	ISO11359-2	1.8E-04	cm/cm/°C
		Linear thermal expansion coefficient	TD：--	ISO11359-2	2E-04	cm/cm/°C
			Linear thermal expansion coefficient	TD：-40to23°C	ISO11359-2	1.7E-04	cm/cm/°C
			Linear thermal expansion coefficient	Linear thermal expansion coefficient	TD：EffectiveThermalDiffusivity	ISO11359-2	9E-08	m²/s

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dielectric Strength		IEC60243-1	20	KV/mm
Dissipation Factor?	100Hz	IEC60250	9E-03
Dissipation Factor?	Dissipation Factor?	1MHz	IEC60250	0.038
Relative Permittivity	100Hz	IEC60250	4.90
Relative Permittivity	Relative Permittivity	1MHz	IEC60250	4.60
Comparative Tracking Index		IEC60112	600	V
Surface Resistivity		IEC60093	>1.0E+15	ohms
Volume Resistivity		IEC60093	4E+13	ohms·cm

Impact Properties	Test Condition	Test Method	Test Result	Unit
Charpy Unnotched Impact Strength	-30°C	ISO179/1eU	NoBreak
Charpy Unnotched Impact Strength	Charpy Unnotched Impact Strength	23°C	ISO179/1eU	NoBreak
Tensile Impact Strength	23°C	ISO8256/1	270	kJ/m²

hardness	Test Condition	Test Method	Test Result	Unit
Shore Hardness	Shore D,15sec	ISO868	51
Shore Hardness	Shore Hardness	Shore D	ISO868	55

Flammability	Test Condition	Test Method	Test Result	Unit
UL flame retardant rating	1.5mm	UL94	HB
	UL flame retardant rating	3.0mm	UL94	HB
		UL flame retardant rating	1.5mm	IEC60695-11-10,-20	HB
		UL flame retardant rating	UL flame retardant rating	3.0mm	IEC60695-11-10,-20	HB
Oxygen Index		ISO4589-2	21	%
FMVSS Flammability		FMVSS302	SE/B
Fogging-G-value	condensate	ISO6452	1E-04	g
Burning Rate	1.00mm	ISO3795	28	mm/min

Supplementary information	Test Condition	Test Method	Test Result	Unit
Odor		VDA270	5.00

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.