Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Modeling Shrinkage | TD | ISO294-4 | 0.77 | % |
| Modeling Shrinkage | MD | ISO294-4 | 0.72 | % |
| Moisture Absorption | Saturation,23°C | ISO62 | 0.80 | % |
| Moisture Absorption | Equilibrium,23°C,50%RH | ISO62 | 0.30 | % |
| Density / Specific Gravity | | ISO1183 | 1.23 | g/cm³ |
| Melt Volume flow Rate | 360°C/10.0kg | ISO1133 | 30.0 | cm3/10min |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile Stress | Yield,23°C | ISO527-2 | 75.0 | Mpa |
| Tensile Strain | Yield,23°C | ISO527-2 | 5.7 | % |
| Tensile Modulus | 23°C | ISO527-2 | 2550 | Mpa |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Deflection Temperature Under Load? | 1.8MPa,Unannealed | ISO75-2/A | 177 | °C |
| Linear thermal expansion coefficient | MD | | 5.3E-05 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Dielectric Strength | | IEC60243-1 | 37 | KV/mm |
| Comparative Tracking Index | | IEC60112 | 125 | V |
| Dissipation Factor? | 100Hz | IEC60250 | 1.1E-03 | |
| Dissipation Factor? | 1MHz | IEC60250 | 7.1E-03 | |
| Surface Resistivity | | IEC60093 | >1.0E+15 | ohms |
| Dielectric Constant | 100Hz | IEC60250 | 3.50 | |
| Dielectric Constant | 1MHz | IEC60250 | 3.40 | |
| Volume Resistivity | | IEC60093 | >1.0E+13 | ohms·cm |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|
| Charpy Unnotched Impact Strength | -30°C | ISO179 | NoBreak | |
| Charpy Unnotched Impact Strength | 23°C | ISO179 | NoBreak | |
| Charpy Notched Impact Strength | -30°C | ISO179 | 6.5 | kJ/m² |
| Charpy Notched Impact Strength | 23°C | ISO179 | 6.0 | kJ/m² |
| Notched Izod Impact Strength | -30°C | ISO180 | 6.5 | kJ/m² |
| Notched Izod Impact Strength | 23°C | ISO180 | 6.0 | kJ/m² |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|
| Ball Indentation Hardness | | ISO2039-1 | 135 | Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
