Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | | 内部方法 | 0.10到0.50 | % |
Modeling Shrinkage | | 内部方法 | 0.10到0.30 | % |
Moisture Absorption | Saturation,23°C | ISO62 | 0.010 | % |
Melt Mass-Flow Rate | 260°C/2.16kg | ISO1133 | 44 | g/10min |
Melt Volume flow Rate | 260°C/2.16kg | ISO1133 | 48.0 | cm3/10min |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Stress | Yield | ISO527-2/1A/50 | 46.0 | Mpa |
Tensile Strain | Yield | ISO527-2/1A/50 | 1.7 | % |
Tensile Modulus | | ISO527-2/1A/1 | 3200 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ISO75-2/B | 127 | °C |
Vicat Softening Temperature | | ISO306/B50 | 135 | °C |
Glass Transition Temperature | | ISO11357-2 | 134 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Relative Permittivity | 1kHz | IEC60250 | 2.35 | |
Relative Permittivity | 10kHz | IEC60250 | 2.35 | |
Relative Permittivity | 1kHz | IEC60250 | 2.35 | |
Relative Permittivity | 10kHz | IEC60250 | 2.35 | |
Comparative Tracking Index | | IEC60112 | >600 | V |
Volume Resistivity | | IEC60093 | >1.0E+16 | ohms·cm |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Unnotched Impact Strength | 23°C | ISO179/1eU | 13 | kJ/m² |
optical performance | Test Condition | Test Method | Test Result | Unit |
---|
Refractive index of light | | ISO489 | 1.530 | |
Refractive index of light | | ISO489 | 1.533 | |
Transmittance | | ISO13468-2 | 91.0 | % |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
UL flame retardant rating | 1.6mm | UL94 | HB | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.