Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Density | | ASTM D792/ISO 1183 | 1.47 | |
Modeling Shrinkage | | ASTM D955 | 0.2-0.9 | % |
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | | | 0.2-0.9 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Notched Impact Strength | | ASTM D256 | 10.8 | kg.cm/cm |
Tensile Strength (Yield) | | ASTM D638 | 1550 | kg/cm2 |
Flexural Strength | | ASTM D790 | 85000 | kg/cm2 |
Tensile Strength | | ASTM D638/ISO 527 | 1550 | kg/cm²(MPa)[Lb/in²] |
Flexural Modulus | | ASTM D790/ISO 178 | 85000 | kg/cm²(MPa)[Lb/in²] |
Charpy impact strength | | ASTM D256/ISO 179 | 10.8 | kg·cm/cm(J/M)ft·lb/in |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Deflection Temperature Under Load? | | ASTM D648/ISO 75 | 215 | ℃(℉) |
Deflection Temperature Under Load? | | ASTM D648 | 215 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Arc Resistance | | ASTM D495/IEC 60112 | 125 | |
Insulation failure strength | | ASTM D149 | 23 | KV/mm |
Arc Resistance | | ASTM D495 | 125 | sec |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.