Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Modeling Shrinkage | long,Across Flow | ISO 294 | 0.10 | % |
Modeling Shrinkage | trans,Across Flow,dry | ISO 294 | 0.75 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Elongation?(Break) | 5mm/min,cond | ISO 527 | 8 | % |
Tensile Modulus | 1mm/min,cond | ISO 527 | 6000 | Mpa |
Shore Hardness | cond | ISO 2039-1 | 77 | Mpa |
Impact Strength | Charpy,-30℃,cond | ISO 179/2-1eU | 80 | KJ/m |
Impact Strength | Charpy,23℃,cond | ISO 179/2-1eU | 80 | KJ/m |
Notched Impact Strength | Charpy,-30℃,cond | ISO 179/2-1eA | 15 | KJ/m |
Notched Impact Strength | Charpy,23℃,cond | ISO 179/2-1eA | 20 | KJ/m |
Tensile Strength(Break) | 5mm/min,cond | ISO 527 | 105 | Mpa |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Flame retardancy | 0.8mm | ISO 1210 | HB | |
Deflection Temperature Under Load? | 8.00MPa,dry | ISO 75 | 160 | °C |
Deflection Temperature Under Load? | 1.80MPa,dry | ISO 75 | 160 | °C |
Melting Temperature | DSC,dry | ISO 11357 | 178 | °C |
Continuous Use Temperature | short term,dry | ISO 2578 | 150 | °C |
Continuous Use Temperature | long term,dry | ISO 2578 | 90-120 | °C |
Coefficient of thermal expansion | 23-55℃,dry | ISO 11359 | 0.2 | |
Coefficient of thermal expansion | 23-55℃,dry(Across Flow) | ISO 11359 | 1.5 | |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Surface Resistivity | cond | IEC 60093 | 10 | Ω |
Arc Resistance | cond | IEC 60112 | 600 | |
Volume Resistivity | dry,cond | IEC 60093 | 10 | Ω.cm |
Dielectric Strength | dry,cond | IEC 60243-1 | 35 | KV/mm |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Density | dry | ISO 1183 | 1.22 | g/cm |
Moisture Absorption | 23℃ | ISO 62 | 1.1 | % |
Hygroscopicity | 23℃/50%rh | ISO 62 | 0.6 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.