PBT VALOX™ 420HP-1001 SABIC INNOVATIVE NANSHA
36
- Unit Price:
- $5034 USD/MT
- Packaging Specification:
- 25KG/PKG
- Supply Quantity:
- 20MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
serv********
For more detailed information including pricing, customization, and shipping, please contact supplier.
Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
Modeling Shrinkage | TD:--3 | 内部方法 | 0.40to0.60 | % |
TD:--4 | 内部方法 | 0.50to1.0 | % | |
TD:3.20mm | 内部方法 | 0.50to1.0 | % | |
MD:--2 | 内部方法 | 0.50to0.80 | % | |
MD:--3 | 内部方法 | 0.30to0.50 | % | |
MD:--4 | 内部方法 | 0.30to0.70 | % | |
MD:3.20mm | 内部方法 | 0.30to0.80 | % | |
TD:--5 | 内部方法 | 0.60to0.90 | % | |
Moisture Absorption | 24hr | ASTMD570 | 0.060 | % |
Saturation,23°C | ISO62 | 0.26 | % | |
Equilibrium,23°C,50%RH | ISO62 | 0.080 | % | |
Melt Mass-Flow Rate | 250°C/2.16kg | ASTMD1238 | 17 | g/10min |
Melt Volume flow Rate | 250°C/2.16kg | ISO1133 | 13.0 | cm3/10min |
Specific Volume | ASTMD792 | 0.650 | cm³/g |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
Tensile Strain | Break | ASTMD638 | 3.0 | % |
Yield | ASTMD638 | 3.0 | % | |
Flexural Modulus | 50.0mmSpan | ASTMD790 | 7580 | Mpa |
Tensile Strength | Break | ASTMD638 | 120 | Mpa |
Yield | ASTMD638 | 120 | Mpa | |
Flexural Strength | Break,50.0mmSpan | ASTMD790 | 189 | Mpa |
Flexural Modulus | ISO178 | 8500 | Mpa | |
Flexural Modulus | ISO178 | 195 | Mpa | |
Tensile Modulus | ASTMD638 | 9300 | Mpa | |
Tensile Modulus | ISO527-2/1 | 9300 | Mpa | |
Tensile Stress | Yield | ISO527-2/5 | 125 | Mpa |
Break | ISO527-2/5 | 125 | Mpa | |
Tensile Strain | Yield | ISO527-2/5 | 2.0 | % |
Break | ISO527-2/5 | 2.0 | % |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
Deflection Temperature Under Load? | 0.45MPa,Unannealed,3.20mm | ASTMD648 | 220 | °C |
0.45MPa,Unannealed,6.40mm | ASTMD648 | 216 | °C | |
1.8MPa,Unannealed,3.20mm | ASTMD648 | 203 | °C | |
Vicat Softening Temperature | ASTMD152514 | 215 | °C | |
-- | ISO306/A50 | 223 | °C | |
-- | ISO306/B50 | 215 | °C | |
-- | ISO306/B120 | 215 | °C | |
Linear thermal expansion coefficient | MD:-40to40°C | ASTME831 | 2.5E-05 | cm/cm/°C |
MD:-40to40°C | ISO11359-2 | 2.5E-05 | cm/cm/°C | |
TD:-40to40°C | ASTME831 | 1.2E-04 | cm/cm/°C | |
TD:-40to40°C | ISO11359-2 | 1.2E-04 | cm/cm/°C | |
Heat Deflection Temperature | 0.45MPa,Unannealed,64.0mmSpan | ISO75-2/Bf | 217 | °C |
1.8MPa,Unannealed,64.0mmSpan | ISO75-2/Af | 204 | °C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
Dielectric Strength | 1.60mm,in Oil | ASTMD149 | 25 | KV/mm |
3.20mm,inAir | ASTMD149 | 19 | KV/mm | |
Dielectric Constant | 100Hz | ASTMD150 | 3.80 | |
1MHz | ASTMD150 | 3.70 | ||
Volume Resistivity | ASTMD257 | >3.2E+16 | ohms·cm | |
Dissipation Factor? | 100Hz | ASTMD150 | 2E-03 | |
1MHz | ASTMD150 | 0.020 |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
Instrumented Dart Impact | 23°C,TotalEnergy | ASTMD3763 | 8.00 | J |
Charpy Unnotched Impact Strength | -30°C | ISO179/1eU | 45 | kJ/m² |
23°C | ISO179/1eU | 45 | kJ/m² | |
Charpy Notched Impact Strength | -30°C | ISO179/1eA | 5.0 | kJ/m² |
23°C | ISO179/1eA | 5.0 | kJ/m² | |
Unnotched Izod Impact Strength | -30°C | ISO180/1U | 45 | kJ/m² |
23°C | ISO180/1U | 45 | kJ/m² | |
Notched Izod Impact Strength | -30°C | ISO180/1A | 7.0 | kJ/m² |
23°C | ISO180/1A | 8.0 | kJ/m² |
hardness | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
Rockwell Hardness | R-Scale | ASTMD785 | 118 |
Supplementary information | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
Filler Content | ASTMD229 | 30 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.