Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Apparent Density | | | 0.70 到 0.80 | g/cm³ |
Melt Volume flow Rate | 250℃,2.16 kg 250℃/2.16 kg | ISO 1133 | 9 | cm3/10min |
Viscosity Number | | ISO 307 | 113 | cm³/g |
Moisture Absorption | Saturation,23℃ Saturation, 73°F | ISO 62 | 0.4 | % |
Moisture Absorption | Equilibrium,23℃,50% RH Equilibrium, 73°F, 50% RH | ISO 62 | 0.2 | % |
Modeling Shrinkage | MD:自由的 free, longitudinal | | 1.7 | % |
Modeling Shrinkage | TD:自由的 free, transverse | | 1.7 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength | Break Break | ISO 527-2 | 50 | Mpa |
Tensile Modulus | | ISO 527-2 | 4000 | Mpa |
Tensile Strain | Break Break | ISO 527-2 | 5 | % |
Tensile Creep Modulus | 1000 hr 1000 hr 5 | ISO 899-1 | 2200 | Mpa |
Ball Indentation Hardness | H358/30 | ISO 2039-1 | 165 | Mpa |
Electrical | Test Condition | Test Method | Test Result | Unit |
---|
Relative Permittivity | 100 Hz 100 Hz | IEC 60250 | 3.8 | |
Relative Permittivity | 1 MHz 1 MHz | IEC 60250 | 3.8 | |
Dissipation Factor | 100 Hz 100 Hz | IEC 60250 | 0.0012 | |
Dissipation Factor | 1 MHz 1 MHz | IEC 60250 | 0.019 | |
Comparative Tracking Index | Solution A Solution A | IEC 60112 | 225 | V |
Comparative Tracking Index | Solution B Solution B | IEC 60112 | 150 | V |
Volume Resistivity | | IEC 60093 | 10000000000000000 | ohms·cm |
Surface Resistivity | | IEC 60093 | 10000000000000 | ohms |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Charpy Unnotched Impact Strength | -30°C -30°C | ISO 179/1eU | 24 | kJ/m² |
Charpy Unnotched Impact Strength | 23℃ 23°C | ISO 179/1eU | 35 | kJ/m² |
特殊值 | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | 0.75 mm 0.75 mm | | HB | |
Flame Rating | 1.6 mm 1.6 mm | | HB | |
Thermal | Test Condition | Test Method | Test Result | Unit |
---|
Melting Temperature | | ISO 11357-3 | 223 | °C |
Coefficient of Linear Thermal Expansion | MD:23~80℃ MD:23 to 80℃ | ISO 11359-2 | 7.0E-5 到 8.0E-5 | 1/℃ |
Specific Heat | | | 1500 | J/kg/℃ |
Thermal Conductivity | | DIN 52612 | 0.27 | W/m/K |
Temperature Index | -- -- 6 6 | IEC 60216 | 120 | °C |
Temperature Index | -- -- 7 7 | IEC 60216 | 130 | °C |
Maximum Service Temperature | short cycle operation | | 200 | °C |
Heat Deflection Temperature | 0.45 MPa,Unannealed 66 psi, Unannealed | ISO 75-2/B | 200 | °C |
Heat Deflection Temperature | 1.8 MPa,Unannealed 264 psi, Unannealed | ISO 75-2/A | 95 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.