PBT VALOX™ 4012G SABIC INNOVATIVE US
85
- Unit Price:
- $3769 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 30.8MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515
serv********
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:Ductility Fast forming cycle
- Application Areas:Connector
- Color:--
- Grade:Enhanced level
Technical Data Sheet
| Physical Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Modeling Shrinkage | MD：--2 | 内部方法 | 0.60to0.90 | % |
| MD：3.20mm | 内部方法 | 0.60to1.6 | % | |
| TD2 | 内部方法 | 0.70to1.0 | % | |
| Moisture Absorption | Saturation,23°C | ISO62 | 0.20 | % |
| Equilibrium,23°C,50%RH | ISO62 | 0.070 | % | |
| Melt Mass-Flow Rate | 250°C/1.2kg | ASTMD1238 | 10 | g/10min |
| Melt Volume flow Rate | 250°C/1.2kg | ISO1133 | 9.00 | cm3/10min |
| Density / Specific Gravity | ASTMD792 | 1.39 | g/cm³ | |
| ISO1183 | 1.39 | g/cm³ |
| Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Flexural Modulus | 50.0mmSpan | ASTMD790 | 3940 | Mpa |
| Flexural Strength | Yield,50.0mmSpan | ASTMD790 | 110 | Mpa |
| Tensile Strength | Yield | ASTMD638 | 75.0 | Mpa |
| Flexural Strength | ISO178 | 110 | Mpa | |
| Tensile Modulus | ASTMD638 | 4600 | Mpa | |
| Tensile Strength | Break | ASTMD638 | 75.0 | Mpa |
| Flexural Modulus | ISO178 | 3500 | Mpa | |
| Tensile Elongation | Break | ASTMD638 | 3.0 | % |
| Yield | ASTMD638 | 3.0 | % | |
| Tensile Modulus | ISO527-2/1 | 4500 | Mpa | |
| Tensile Stress | Yield | ISO527-2/5 | 72.0 | Mpa |
| Break | ISO527-2/5 | 72.0 | Mpa | |
| Tensile Strain | Yield | ISO527-2/5 | 4.0 | % |
| Break | ISO527-2/5 | 4.0 | % |
| Thermal Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Linear thermal expansion coefficient | MD：-40to40°C | ASTME831 | 6E-05 | cm/cm/°C |
| MD：23to80°C | ISO11359-2 | 6E-05 | cm/cm/°C | |
| TD：-40to40°C | ASTME831 | 8E-05 | cm/cm/°C | |
| TD：23to80°C | ISO11359-2 | 8E-05 | cm/cm/°C | |
| TD：23to150°C | ISO11359-2 | 8.5E-05 | cm/cm/°C | |
| Deflection Temperature Under Load? | 1.8MPa,Unannealed,3.20mm | ASTMD648 | 175 | °C |
| Ball PressureTest | 125°C | IEC60695-10-2 | Pass | |
| Heat Deflection Temperature | 0.45MPa,Unannealed,100mmSpan | ISO75-2/Be | 215 | °C |
| 1.8MPa,Unannealed,100mmSpan | ISO75-2/Ae | 170 | °C | |
| Vicat Softening Temperature | ASTMD152511 | 205 | °C | |
| -- | ISO306/B50 | 205 | °C | |
| -- | ISO306/B120 | 208 | °C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Surface Resistivity | IEC60093 | >1.0E+15 | ohms | |
| Volume Resistivity | IEC60093 | >1.0E+15 | ohms·cm | |
| Relative Permittivity | 50Hz | IEC60250 | 3.10 | |
| 60Hz | IEC60250 | 3.10 | ||
| 1MHz | IEC60250 | 3.00 | ||
| Comparative Tracking Index | -- | IEC60112 | 250 | V |
| SolutionB | IEC60112 | 150 | V | |
| Dielectric Strength | 0.800mm,in Oil | IEC60243-1 | 30 | KV/mm |
| 1.60mm,in Oil | IEC60243-1 | 25 | KV/mm | |
| 3.20mm,in Oil | IEC60243-1 | 17 | KV/mm | |
| Dissipation Factor? | 50Hz | IEC60250 | 1E-03 | |
| 60Hz | IEC60250 | 1E-03 | ||
| 1MHz | IEC60250 | 0.014 |
| Impact Properties | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Instrumented Dart Impact | 23°C,TotalEnergy | ASTMD3763 | 4.00 | J |
| Charpy Notched Impact Strength | -30°C | ISO179/1eA | 6.0 | kJ/m² |
| 23°C | ISO179/1eA | 7.0 | kJ/m² | |
| Charpy Unnotched Impact Strength | -30°C | ISO179/1eU | 45 | kJ/m² |
| 23°C | ISO179/1eU | 45 | kJ/m² | |
| Unnotched Izod Impact Strength | -30°C | ISO180/1U | 37 | kJ/m² |
| 23°C | ISO180/1U | 37 | kJ/m² | |
| Notched Izod Impact Strength | -30°C | ASTMD256 | 74 | J/m |
| 23°C | ASTMD256 | 74 | J/m | |
| Notched Izod Impact Strength | -30°C | ISO180/1A | 6.0 | kJ/m² |
| 23°C | ISO180/1A | 6.0 | kJ/m² |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Ball Indentation Hardness | H358/30 | ISO2039-1 | 117 | Mpa |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| UL flame retardant rating | 1.6mm,TestingbySABIC | UL94 | HB | |
| Glow Wire Flammability Index | 1.0mm | IEC60695-2-12 | 750 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.