Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Taber wear | (1.000g·CS-17轮) | ASTM D-1044 | 20 | 毫克/1.000m |
Heat Deflection Temperature | 4.6kg/cm | ASTM D-648 | 220 | °C |
Heat Deflection Temperature | 18.6kg.cm | ASTM D-648 | 206 | °C |
Modeling Shrinkage | 80×80×3板材 | | 0.6-1.5 | % |
Density / Specific Gravity | | ASTM D-792 | 1.42 | |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Notched Izod Impact Strength | Unnotched,23℃ | ASTM D-256 | 50 | kg·cm/cm |
Notched Izod Impact Strength | Unnotched,-40℃ | ASTM D-256 | 35 | kg·cm/cm |
Notched Izod Impact Strength | Notched,23℃ | ASTM D-256 | 5.0 | kg·cm/cm |
Notched Izod Impact Strength | Notched,-40℃ | ASTM D-256 | 4.4 | kg·cm/cm |
Tensile Elongation (Break) | 23℃ | ASTM D-638 | 5 | % |
Compressive Strength | 23℃ | ASTM D-695 | 1050 | kg/cm |
Tensile Strength | 23℃ | ASTM D-638 | 1000 | kg/cm |
Rockwell Hardness | 23℃ | ASTM D-785 | 90 | M标度 |
Flexural Modulus | 23℃ | ASTM D-790 | 51 | kg/cm |
Flexural Strength | 23℃ | ASTM D-790 | 1500 | kg/cm |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|
Coefficient of Linear Thermal Expansion | | ASTM D-696 | 5.2 | cm/cm℃×10 |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|
Dielectric Strength | 短时·23℃·1/8时 | ASTM D-149 | 20 | KV/mm |
Volume Resistivity | | ASTM D-257 | 2.1 | cm×10 |
Arc Resistance | | ASTM D-495 | 129 | 秒 |
Physical | Test Condition | Test Method | Test Result | Unit |
---|
Moisture Absorption | 23℃·24hr | ASTM D-570 | 0.07 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.