PBT VALOX™ 420SE0 SABIC INNOVATIVE US

Unit Price:
$3414 USD/MT
Packaging Specification:
25KG/PKG
Supply Quantity:
20MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	MD：--2	内部方法	0.10to0.50	%
	Modeling Shrinkage	MD：3.20mm	内部方法	0.50to0.70	%
		Modeling Shrinkage	TD：--2	内部方法	0.40to0.80	%
		Modeling Shrinkage	Modeling Shrinkage	TD：3.20mm	内部方法	0.50to1.0	%
Moisture Absorption	Saturation,23°C	ISO62	0.090	%
Moisture Absorption	Moisture Absorption	Equilibrium,23°C,50%RH	ISO62	0.070	%
Melt Mass-Flow Rate	250°C/5.0kg	ASTMD1238	42	g/10min
Melt Volume flow Rate	250°C/5.0kg	ISO1133	29.0	cm3/10min
Specific Volume		ASTMD792	0.610	cm³/g
Outdoor Suitability		UL746C	f2
Density / Specific Gravity		ASTMD792	1.63	g/cm³
Density / Specific Gravity	Density / Specific Gravity		ISO1183	1.63	g/cm³

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Flexural Modulus	50.0mmSpan	ASTMD790	9800	Mpa
Flexural Strength	Break,50.0mmSpan	ASTMD790	186	Mpa
Tensile Strength	Yield	ASTMD638	120	Mpa
Tensile Modulus		ASTMD638	12000	Mpa
Tensile Strength	Break	ASTMD638	120	Mpa
Flexural Modulus		ISO178	9500	Mpa
Flexural Stress		ISO178	180	Mpa
Tensile Elongation	Break	ASTMD638	2.0	%
Tensile Elongation	Tensile Elongation	Yield	ASTMD638	2.0	%
Taber Abrasion Resistance	1000Cycles,1000g,CS-17Wheel	内部方法	22.0	mg
Tensile Stress	Break	ISO527-2/5	120	Mpa
Tensile Stress	Tensile Stress	Yield	ISO527-2/5	120	Mpa
Tensile Strain	Yield	ISO527-2/5	1.9	%
Tensile Strain	Tensile Strain	Break	ISO527-2/5	1.9	%
Tensile Modulus		ISO527-2/1	10000	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Deflection Temperature Under Load?	0.45MPa,Unannealed,3.20mm	ASTMD648	212	°C
	Deflection Temperature Under Load?	1.8MPa,Unannealed,3.20mm	ASTMD648	200	°C
		Deflection Temperature Under Load?	1.8MPa,Unannealed,100mmSpan9	ISO75-2/Ae	195	°C
		Deflection Temperature Under Load?	Deflection Temperature Under Load?	1.8MPa,Unannealed,64.0mmSpan10	ISO75-2/Af	200	°C
Vicat Softening Temperature		ASTMD152511	200	°C
	Vicat Softening Temperature	--	ISO306/A50	220	°C
		Vicat Softening Temperature	--	ISO306/B50	200	°C
		Vicat Softening Temperature	Vicat Softening Temperature	--	ISO306/B120	200	°C
Linear thermal expansion coefficient	MD：-40to40°C	ASTME831	2.5E-05	cm/cm/°C
	Linear thermal expansion coefficient	MD：-40to40°C	ISO11359-2	2.5E-05	cm/cm/°C
		Linear thermal expansion coefficient	MD：23to80°C	ISO11359-2	2.5E-05	cm/cm/°C
			Linear thermal expansion coefficient	TD：-40to40°C	ASTME831	8.9E-05	cm/cm/°C
				Linear thermal expansion coefficient	TD：-40to40°C	ISO11359-2	8.9E-05	cm/cm/°C
				Linear thermal expansion coefficient	Linear thermal expansion coefficient	TD：23to80°C	ISO11359-2	1.2E-04	cm/cm/°C
RTIElec		UL746	130	°C
Evolution Calendar intelligent importer		UL746	130	°C
RTIStr		UL746	140	°C
Thermal Conductivity		ISO8302	0.25	W/m/K
Ball PressureTest	125°C	IEC60695-10-2	Pass
Heat Deflection Temperature	0.45MPa,Unannealed,100mmSpan	ISO75-2/Be	220	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Arc Resistance		ASTMD495	PLC6
Relative Permittivity	50Hz	IEC60250	3.30
	Relative Permittivity	60Hz	IEC60250	3.30
		Relative Permittivity	100Hz	IEC60250	3.80
		Relative Permittivity	Relative Permittivity	1MHz	IEC60250	3.30
Comparative Tracking Index	--	IEC60112	175	V
Comparative Tracking Index	Comparative Tracking Index	SolutionB	IEC60112	125	V
Hot-wire Ignition	HWI	UL746	PLC2
Dielectric Strength	1.60mm,in Oil	ASTMD149	24	KV/mm
	Dielectric Strength	3.20mm,inAir	ASTMD149	19	KV/mm
		Dielectric Strength	0.800mm,in Oil	IEC60243-1	23	KV/mm
			Dielectric Strength	1.60mm,in Oil	IEC60243-1	22	KV/mm
			Dielectric Strength	Dielectric Strength	3.20mm,in Oil	IEC60243-1	16	KV/mm
Comparative Tracking Index	CTI	UL746	PLC3
High Amp Arc Ignition	HAI	UL746	PLC0
High Voltage Arc Tracking Rate	HVTR	UL746	PLC4
Dissipation Factor?	100Hz	ASTMD150	2E-03
	Dissipation Factor?	1MHz	ASTMD150	0.020
		Dissipation Factor?	50Hz	IEC60250	1E-03
			Dissipation Factor?	60Hz	IEC60250	1E-03
				Dissipation Factor?	100Hz	IEC60250	2E-03
				Dissipation Factor?	Dissipation Factor?	1MHz	IEC60250	0.010
Surface Resistivity		IEC60093	>1.0E+15	ohms
Dielectric Constant	100Hz	ASTMD150	3.80
Dielectric Constant	Dielectric Constant	1MHz	ASTMD150	3.70
Volume Resistivity		ASTMD257	>1.0E+15	ohms·cm
Volume Resistivity	Volume Resistivity		IEC60093	>1.0E+15	ohms·cm

Impact Properties	Test Condition	Test Method	Test Result	Unit
Unnotched Izod Impact Strength	-30°C	ISO180/1U	45	kJ/m²
Unnotched Izod Impact Strength	Unnotched Izod Impact Strength	23°C	ISO180/1U	45	kJ/m²
Instrumented Dart Impact	23°C,TotalEnergy	ASTMD3763	5.00	J
Charpy Notched Impact Strength	-30°C	ISO179/1eA	6.0	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO179/1eA	7.0	kJ/m²
Charpy Unnotched Impact Strength	-30°C	ISO179/1eU	50	kJ/m²
Charpy Unnotched Impact Strength	Charpy Unnotched Impact Strength	23°C	ISO179/1eU	50	kJ/m²
Notched Izod Impact Strength	-30°C	ISO180/1A	6.0	kJ/m²
Notched Izod Impact Strength	Notched Izod Impact Strength	23°C	ISO180/1A	7.0	kJ/m²
Notched Izod Impact Strength	23°C	ASTMD4812	620	J/m
	Notched Izod Impact Strength	-30°C	ASTMD256	57	J/m
	Notched Izod Impact Strength	Notched Izod Impact Strength	23°C	ASTMD256	60	J/m

hardness	Test Condition	Test Method	Test Result	Unit
Rockwell Hardness	R-Scale	ASTMD785	119
Rockwell Hardness	Rockwell Hardness	R-Scale	ISO2039-2	119
Ball Indentation Hardness	H358/30	ISO2039-1	118	Mpa

Flammability	Test Condition	Test Method	Test Result	Unit
Oxygen Index		ISO4589-2	32	%
UL flame retardant rating	0.40mm	UL94	V-2
	UL flame retardant rating	0.71mm	UL94	V-0
	UL flame retardant rating	UL flame retardant rating	2.0mm	UL94	5VA
Glow Wire Flammability Index	1.0mm	IEC60695-2-12	960	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.