PBT Crastin® SK605 DUPONT TAIWAN
49
- Unit Price:
- $3977 USD/MT
- Packaging Specification:
- 25KG/PKG
- Supply Quantity:
- 15MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
serv********
For more detailed information including pricing, customization, and shipping, please contact supplier.
Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
Density / Specific Gravity | ASTM D792 | 1.53 | ||
ISO1183 | 1.53 | g/cm³ | ||
Melt Mass-Flow Rate | ISO1133 | 10 | g/10min | |
MediumDensity | 1.36 | g/cm³ | ||
Ejection Temperature | 170 | °C | ||
Melt Volume flow Rate | 250°C/2.16kg | ISO1133 | 7.00 | cm3/10min |
Modeling Shrinkage | TD | ISO294-4 | 1.1 | % |
MD | ISO294-4 | 0.30 | % | |
Moisture Absorption | Saturation,23°C,2.00mm | ISO62 | 0.35 | % |
Equilibrium,23°C,2.00mm,50%RH | ISO62 | 0.15 | % | |
Viscosity number | ISO307 | 100 | cm³/g | |
SpecificHeatCapacityofMelt | 1730 | J/kg/°C | ||
ThermalConductivityofMelt | 0.28 | W/m/K |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
Tensile Modulus | ISO527-2 | 10000 | Mpa | |
Tensile Stress | Break | ISO527-2 | 140 | Mpa |
Tensile Strain | Break | ISO527-2 | 2.7 | % |
Tensile Creep Modulus | 1hr | ISO899-1 | 9000 | Mpa |
Tensile Creep Modulus | 1000hr | ISO899-1 | 6600 | Mpa |
Flexural Modulus | ISO178 | 9000 | Mpa | |
Flexural Stress | ISO178 | 200 | Mpa | |
Tensile Strength | 5 mm/min, 3.20 mm, 23 ℃ | MPa | ASTM D695 | 202 |
Tensile Strength | 23℃ | MPa | ASTM D638 | 140 |
Tensile Modulus | 23℃ | MPa | ASTM D638 | 10000 |
Flexural Modulus | 23℃ | MPa | ASTM D790 | 8970 |
Flexural Strength | 23℃ | MPa | ASTM D790 | |
Tensile Elongation?(Break) | 23℃ | % | ASTM D638 | 2.6 |
Notched Izod Impact Strength | J/m | ASTM D256 | 101 | |
Notched Impact Strength | -,-40℃ | J/m | ASTM D256 | 101 |
-,23℃ | J/m | ASTM D256 | 112 | |
Unnotched Izod Impact Strength | -,-40℃ | J/m | ASTM D256 | 1120 |
-,23℃ | J/m | ASTM D256 | 998 |
Thermal Properties | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
Deflection Temperature Under Load? | -,0.45Mpa,Unannealed | ℃ | ASTM D648 | |
-,1.8Mpa,Unannealed | ℃ | ASTM D648 | 205 | |
Coefficient of Linear Thermal Expansion | 平行Flow ,73 to 130°F (23 to 55℃) | cm/cm/℃ | ASTM E831 | 0.000030 |
垂直Flow ,73 to 130°F (23 to 55℃) | cm/cm/℃ | ASTM E831 | 0.000090 | |
Melting Temperature | ℃ | 225 | ||
Flame Rating | -,0.750 mm | UL 94 | HB | |
-,1.50 mm | UL 94 | HB | ||
-,3.00 mm | UL 94 | HB | ||
Linear thermal expansion coefficient | TD | ISO11359-2 | 9E-05 | cm/cm/°C |
Deflection Temperature Under Load? | 0.45MPa,Unannealed | ISO75-2/B | 220 | °C |
1.8MPa,Unannealed | ISO75-2/A | 205 | °C | |
Vicat Softening Temperature | ISO306/B50 | 215 | °C | |
Melting Temperature | ISO11357-3 | 224 | °C | |
Linear thermal expansion coefficient | MD | ISO11359-2 | 3E-05 | cm/cm/°C |
Electrical performance | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
Surface Resistivity | IEC60093 | >1.0E+15 | ohms | |
Volume Resistivity | IEC60093 | >1.0E+15 | ohms·cm | |
Dielectric Strength | IEC60243-1 | 38 | KV/mm | |
Relative Permittivity | 100Hz | IEC60250 | 3.90 | |
1MHz | IEC60250 | 3.80 | ||
Dissipation Factor? | 100Hz | IEC60250 | 7.5E-04 | |
1MHz | IEC60250 | 0.018 | ||
Comparative Tracking Index | IEC60112 | 400 | V |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
Charpy Notched Impact Strength | -40°C | ISO179/1eA | 10 | kJ/m² |
-30°C | ISO179/1eA | 11 | kJ/m² | |
23°C | ISO179/1eA | 10 | kJ/m² | |
Charpy Unnotched Impact Strength | -40°C | ISO179/1eU | 75 | kJ/m² |
-30°C | ISO179/1eU | 75 | kJ/m² | |
23°C | ISO179/1eU | 70 | kJ/m² | |
Notched Izod Impact Strength | -40°C | ISO180/1A | 10 | kJ/m² |
-30°C | ISO180/1A | 10 | kJ/m² | |
23°C | ISO180/1A | 11 | kJ/m² | |
Notched Izod impact strength | -40°C | ISO180/1U | 55 | kJ/m² |
-30°C | ISO180/1U | 55 | kJ/m² | |
23°C | ISO180/1U | 60 | kJ/m² |
Other | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
Oxygen Index | % | ASTM D2863 |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
Burning Rate | 1.00mm | ISO3795 | 41 | mm/min |
UL flame retardant rating | 0.75mm | UL94 | HB | |
1.5mm | UL94 | HB | ||
0.75mm | IEC60695-11-10,-20 | HB | ||
1.5mm | IEC60695-11-10,-20 | HB | ||
Oxygen Index | ISO4589-2 | 19 | % | |
FMVSS Flammability | FMVSS302 | B | ||
Fogging-F-value | refraction | ISO6452 | 99 | % |
Supplementary information | Test Condition | Test Method | Test Result | Unit |
---|---|---|---|---|
EmissionofOrganicCompounds | VDA277 | 140 | µgC/g | |
Odor | VDA270 | 3.00 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.