Technical Data Sheet
Physical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Moisture Absorption | 23℃,24hr 23°C、24hr | ASTM D570 | 0.06 | % |
Melt Mass-Flow Rate | 250℃,10.0kg 250°C/10.0 kg | ASTM D1238 | 17 | g/10min |
Modeling Shrinkage | MD:3.2 mm Flow (3.20 mm) | ASTM D570 | 0.50 to 0.70 | % |
Mechanical Properties | Test Condition | Test Method | Test Result | Unit |
---|
Tensile Strength | Yield,23℃ Yield,23°C | ASTM D638 | 63 | Mpa |
Flexural Modulus | | ASTM D790 | 2530 | Mpa |
Flexural Strength | | ASTM D790 | 98 | Mpa |
Tensile Strain | Break | ASTM D638 | 40 | % |
Impact Properties | Test Condition | Test Method | Test Result | Unit |
---|
Notched Izod Impact Strength | | ASTM D256 | 117 | J/m |
Flammability | Test Condition | Test Method | Test Result | Unit |
---|
Flame Rating | 1.50 mm 1.5mm | UL 94 | V-0 | |
Flame Rating | 2.00 mm 2.0mm | UL 94 | 5VB | |
Flame Rating | 2.50 mm 2.5mm | UL 94 | 5VA | |
Thermal | Test Condition | Test Method | Test Result | Unit |
---|
Heat Deflection Temperature | 1.8 MPa,Unannealed 1.8 MPa, Unannealed, | ASTM D648 | 105 | °C |
Coefficient of Linear Thermal Expansion | MD MD | ASTM E831 | 0.000070 | 1/℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.