PPO NORYL™ V0150B-701 SABIC INNOVATIVE SHANGHAI

185

Unit Price:
$5486 USD/MT
Packaging Specification:
25 KG/PKG
Supply Quantity:
11MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 2787 3515View

serv********View

For more detailed information including pricing, customization, and shipping, please contact supplier.

Material Description

Technical Data Sheet

Material Description

Material Properties:High temperature resistan High mobility Glass fiber reinforced
Application Areas:Electrical applications Automotive interior parts
Color:--
Grade:Injection grade

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result	Unit
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	0.060	%
Water absorption rate	Water absorption rate	Saturation, 23°C	ISO 62	0.18	%
Melt flow rate	280°C/5.0 kg	ASTM D1238	3.5	g/10 min
Molten Volume Flow Rate (MVR)	300°C/5.0 kg	ISO 1133	10.0	cm3/10min
Shrinkage rate - flow	3.20 mm	内部方法	0.50 到 0.70	%
Shrinkage rate - flow	Shrinkage rate - flow	-- 2	内部方法	0.50 到 0.70	%

Mechanical performance	Test Condition	Test Method	Test Result	Unit
Taber abraser	1000 Cycles, 1000 g, CS-17 Wheel	内部方法	35.0	mg
Bending stress	Yield, 50.0 mm Span 5	ASTM D790	105	Mpa
Bending stress	Bending stress	-- 6, 7	ISO 178	110	Mpa
Tensile strength	Break	ISO 527-2/50	55.0	Mpa
	Tensile strength	Break 4	ASTM D638	60.0	Mpa
		Tensile strength	Yield	ISO 527-2/50	70.0	Mpa
		Tensile strength	Tensile strength	Yield 4	ASTM D638	70.0	Mpa
Tensile modulus	--	ISO 527-2/1	2500	Mpa
Tensile modulus	Tensile modulus	-- 3	ASTM D638	2500	Mpa
elongation	Break	ISO 527-2/50	10	%
	elongation	Break 4	ASTM D638	7.0	%
		elongation	Yield	ISO 527-2/50	4.0	%
		elongation	elongation	Yield 4	ASTM D638	5.0	%
Bending modulus	-- 6	ISO 178	2400	Mpa
Bending modulus	Bending modulus	50.0 mm Span 5	ASTM D790	2550	Mpa

Thermal performance	Test Condition	Test Method	Test Result	Unit
Hot deformation temperature	0.45 MPa, Unannealed, 4.00 mm, 100 mm Span 10	ISO 75-2/Be	140	°C
	Hot deformation temperature	1.8 MPa, Unannealed, 3.20 mm	ASTM D648	135	°C
	Hot deformation temperature	Hot deformation temperature	1.8 MPa, Unannealed, 4.00 mm, 100 mm Span 10	ISO 75-2/Ae	130	°C
Vicat softening temperature	--	ASTM D152511, ISO 306/B12011	155	°C
	Vicat softening temperature	--	ISO 306/A50	160	°C
	Vicat softening temperature	Vicat softening temperature	--	ISO 306/B50	145	°C
thermal conductivity		ISO 8302	0.27	W/m/K
RTI		UL 746	115	°C
RTI Imp		UL 746	105	°C
RTI Elec		UL 746	110	°C
Linear coefficient of thermal expansion	Flow : -40 to 40°C	ASTM E831	7.5E-5	cm/cm/°C
	Linear coefficient of thermal expansion	Flow : 23 to 80°C	ISO 11359-2	7.0E-5	cm/cm/°C
		Linear coefficient of thermal expansion	Across Flow : -40 to 40°C	ASTM E831	7.5E-5	cm/cm/°C
		Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow : 23 to 80°C	ISO 11359-2	9.0E-5	cm/cm/°C
Ball Pressure Test	123 to 127°C	IEC 60695-10-2	通过
Ball Pressure Test	Ball Pressure Test	140°C 12	IEC 60695-10-2	通过

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dielectric strength	0.800 mm, in Oil	IEC 60243-1	33	KV/mm
	Dielectric strength	1.60 mm, in Oil	IEC 60243-1	26	KV/mm
	Dielectric strength	Dielectric strength	3.20 mm, in Oil	IEC 60243-1	16	KV/mm
Relative permittivity	50 Hz	IEC 60250	2.80
	Relative permittivity	60 Hz	IEC 60250	2.80
	Relative permittivity	Relative permittivity	1 MHz	IEC 60250	2.70
Leakage Trace Index		IEC 60112	250	V
Dissipation factor	50 Hz	IEC 60250	9.0E-4
	Dissipation factor	60 Hz	IEC 60250	9.0E-4
	Dissipation factor	Dissipation factor	1 MHz	IEC 60250	3.0E-3
Surface resistivity		IEC 60093	> 1.0E+15	ohms
Volume resistivity		IEC 60093	1.0E+15	ohms·cm

injection	Test Result	Unit
drying temperature	110 到 120	°C
Processing (melt) temperature	300 到 320	°C
Mold temperature	100 到 130	°C
Hopper temperature	80 到 100	°C
drying time	2.0 到 3.0	hr
Temperature at the rear of the barrel	260 到 280	°C
Temperature in the middle of the barrel	280 到 300	°C
Temperature at the front of the material cylinder	300 到 320	°C
Spray nozzle temperature	280 到 300	°C

Impact performance	Test Condition	Test Method	Test Result	Unit
Dart impact equipped with measuring instruments	23°C, Total Energy	ASTM D3763	50.0	J
Impact strength of simply supported beam gap 8	23°C	ISO 179/1eA	14	kJ/m²
Impact strength of simply supported beam gap 8	Impact strength of simply supported beam gap 8	-30°C	ISO 179/1eA	5.0	kJ/m²

hardness	Test Condition	Test Method	Test Result	Unit
Ball pressure hardness	H 358/30	ISO 2039-1	113	Mpa

flammability	Test Condition	Test Method	Test Result	Unit
Burning wire flammability index	1.0 mm	IEC 60695-2-12	960	°C
Extreme Oxygen Index		ISO 4589-2	32	%
Hot filament ignition temperature	1.0 mm	IEC 60695-2-13	775	°C
	Hot filament ignition temperature	2.0 mm	IEC 60695-2-13	775	°C
	Hot filament ignition temperature	Hot filament ignition temperature	3.0 mm	IEC 60695-2-13	775	°C
UL flame retardant rating	1.5 mm	UL 94	V-0
UL flame retardant rating	UL flame retardant rating	2.0 mm	UL 94	5VA

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.