PPO FLEX NORYL™ SE1X-701 SABIC INNOVATIVE SHANGHAI

Unit Price:
$4008 USD/MT
Packaging Specification:
25KG/PKG
Supply Quantity:
45MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

serv********

For more detailed information including pricing, customization, and shipping, please contact supplier.

Technical Data Sheet

Physical Properties	Test Condition	Test Method	Test Result	Unit
Modeling Shrinkage	Flow : 3.20 mm	内部方法	0.50 到 0.70	%
Modeling Shrinkage	Modeling Shrinkage	Across Flow 2	内部方法	0.50 到 0.70	%
Moisture Absorption	24 hr	ASTM D570	0.060	%
Outdoor Suitability		UL 746C	f1

Mechanical Properties	Test Condition	Test Method	Test Result	Unit
Flexural Modulus	100 mm Span	ASTM D790	2500	Mpa
Flexural Strength	Yield, 100 mm Span	ASTM D790	102	Mpa
Tensile Elongation	Yield	ASTM D638	8.1	%
Tensile Elongation	Tensile Elongation	Break	ASTM D638	20	%
Tensile Strength	Yield	ASTM D638	67.0	Mpa
Tensile Strength	Tensile Strength	Break	ASTM D638	53.0	Mpa

Thermal Properties	Test Condition	Test Method	Test Result	Unit
Deflection Temperature Under Load?	0.45 MPa, Unannealed, 6.40 mm	ASTM D648	126	°C
Deflection Temperature Under Load?	Deflection Temperature Under Load?	1.8 MPa, Unannealed, 6.40 mm	ASTM D648	117	°C
RTI		UL 746	110	°C
RTI Imp		UL 746	105	°C
RTI Elec		UL 746	110	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Surface Resistivity		ASTM D257	> 1.0E+15	ohms
Dielectric Constant	60 Hz	ASTM D150	2.52
	Dielectric Constant	50 kHz	ASTM D150	2.52
	Dielectric Constant	Dielectric Constant	1 MHz	ASTM D150	2.46
Volume Resistivity		ASTM D257	2.3E+16	ohms·cm
Dissipation Factor?	50 Hz	ASTM D150	3.4E-3
	Dissipation Factor?	60 Hz	ASTM D150	3.4E-3
	Dissipation Factor?	Dissipation Factor?	1 MHz	ASTM D150	2.1E-3
Dielectric Strength	3.20 mm, in Oil	ASTM D149	18	KV/mm
Comparative Tracking Index		UL 746	PLC 1
High Voltage Arc Tracking Rate		UL 746	PLC 4
Arc Resistance		ASTM D495	PLC 6

Injection	Test Result	Unit
Drying Time	3.0 到 4.0	hr
Suggested Shot Size	30 到 70	%
Rear Temperature	250 到 300	°C
Middle Temperature	260 到 305	°C
Front Temperature	270 到 310	°C
Nozzle Temperature	280 到 310	°C
Back Pressure	0.300 到 0.700	Mpa
Screw Speed	20 到 100	rpm
Drying Temperature	105 到 110	°C
Suggested Max Moisture	0.020	%
Processing (Melt) Temp	280 到 310	°C
Mold Temperature	75 到 105	°C

Impact Properties	Test Condition	Test Method	Test Result	Unit
Instrumented Dart Impact	-30°C, Energy at Peak	ASTM D3763	32.0	J
Instrumented Dart Impact	Instrumented Dart Impact	23°C, Energy at Peak	ASTM D3763	51.0	J

Flammability	Test Condition	Test Method	Test Result	Unit
Radiant Panel Listing 6			RP100
Flame Rating	1.5 mm	UL 94	V-1
Flame Rating	Flame Rating	6.0 mm	UL 94	V-0

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.