PC LEXAN™ HPS1-1H1125 SABIC INNOVATIVE US
103
- Unit Price:
- $8071 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 10MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:High mobility
- Application Areas:medicine medical care
- Color:--
- Grade:Medical grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Shrinkage rate | MD：3.20mm | 内部方法 | 0.50to0.70 | % |
| Water absorption rate | 24hr | ASTMD570 | 0.15 | % |
| Equilibrium,23°C | ASTMD570 | 0.35 | % | |
| Equilibrium,100°C | ASTMD570 | 0.58 | % | |
| Specific volume | ASTMD792 | 0.835 | cm³/g | |
| Melt mass flow rate | 300°C/1.2kg | ASTMD1238 | 25 | g/10min |
| Melt volume flow rate | 300°C/1.2kg | ISO1133 | 23.0 | cm3/10min |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile modulus 2 | ASTMD638 | 2380 | Mpa | |
| Tensile modulus | ISO527-2/1 | 2350 | Mpa | |
| Tensile strength 3 | Yield | ASTMD638 | 62.1 | Mpa |
| Tensile stress | Yield | ISO527-2/50 | 63.0 | Mpa |
| Tensile strength 3 | Break | ASTMD638 | 65.5 | Mpa |
| Tensile stress | Break | ISO527-2/50 | 50.0 | Mpa |
| Elongation rate 3 | Yield | ASTMD638 | 6.0 | % |
| Tensile strain | Yield | ISO527-2/50 | 6.0 | % |
| Elongation rate 4 | Break | ASTMD638 | 120 | % |
| Tensile strain | Break | ISO527-2/50 | 70 | % |
| Bending modulus 4 | 50.0mmSpan | ASTMD790 | 2310 | Mpa |
| Bending modulus 5 | ISO178 | 2300 | Mpa | |
| Bending strength 5,6 | ISO178 | 90.0 | Mpa | |
| Bending strength 4 | Yield,50.0mmSpan | ASTMD790 | 93.1 | Mpa |
| Taber abraser | 1000Cycles,1000g,CS-17Wheel | ASTMD1044 | 10.0 | mg |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| thermal conductivity | ASTMC177 | 0.19 | W/m/K | |
| ISO8302 | 0.20 | W/m/K | ||
| Hot deformation temperature | 0.45MPa,Unannealed,6.40mm | ASTMD648 | 138 | °C |
| Hot deformation temperature 10 | 0.45MPa,Unannealed,100mmSpan | ISO75-2/Be | 133 | °C |
| Hot deformation temperature | 1.8MPa,Unannealed,6.40mm | ASTMD648 | 127 | °C |
| Hot deformation temperature 10 | 1.8MPa,Unannealed,100mmSpan | ISO75-2/Ae | 121 | °C |
| Vicat softening temperature | -- | ISO306/B50 | 139 | °C |
| -- | ISO306/B120 | 140 | °C | |
| BallPressure Test | 125°C | IEC60695-10-2 | Pass | |
| Linear coefficient of thermal expansion | MD：-40to95°C | ASTME831 | 6.8E-05 | cm/cm/°C |
| MD：23to80°C | ISO11359-2 | 7E-05 | cm/cm/°C | |
| specific heat | ASTMC351 | 1260 | J/kg/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Relative permittivity | 50Hz | IEC60250 | 2.70 | |
| 60Hz | IEC60250 | 2.70 | ||
| 1MHz | IEC60250 | 2.70 | ||
| Dissipation factor | 50Hz | ASTMD150 | 9E-04 | |
| 60Hz | ASTMD150 | 9E-04 | ||
| 1MHz | ASTMD150 | 0.010 | ||
| 50Hz | IEC60250 | 1E-03 | ||
| 60Hz | IEC60250 | 1E-03 | ||
| 1MHz | IEC60250 | 0.010 | ||
| Surface resistivity | IEC60093 | >1.0E+15 | ohms | |
| Volume resistivity | ASTMD257 | >1.0E+17 | ohms·cm | |
| IEC60093 | >1.0E+15 | ohms·cm | ||
| Dielectric strength | 3.20mm,inAir | ASTMD149 | 15 | KV/mm |
| 3.20mm,in Oil | IEC60243-1 | 17 | KV/mm | |
| Dielectric constant | 50Hz | ASTMD150 | 3.17 | |
| 60Hz | ASTMD150 | 3.17 | ||
| 1MHz | ASTMD150 | 2.96 |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Suspended wall beam gap impact strength 8 | 23°C | ISO180/1A | 12 | kJ/m² |
| Unscented Izod Impact Strength 8 | -30°C | ISO180/1U | NoBreak | |
| 23°C | ISO180/1U | NoBreak | ||
| Dart impact equipped with measuring instruments | 23°C,EnergyatPeakLoad | ASTMD3763 | 54.2 | J |
| Falling hammer impact | 23°C | ASTMD3029 | 169 | J |
| Tensile impact strength 9 | ASTMD1822 | 378 | kJ/m² | |
| Impact strength of simply supported beam gap 7 | -30°C | ISO179/1eA | 10 | kJ/m² |
| 23°C | ISO179/1eA | 12 | kJ/m² | |
| Suspended wall beam gap impact strength 8 | -30°C | ISO180/1A | 10 | kJ/m² |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Rockwell hardness | M-Sale | ASTMD785 | 70 | |
| R-Sale | ASTMD785 | 118 | ||
| Ball pressure hardness | H358/30 | ISO2039-1 | 95.0 | Mpa |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Refractive index | ASTMD542 | 1.586 | ||
| transmissivity | 2540µm | ASTMD1003 | 88.0 | % |
| Haze | 2540µm | ASTMD1003 | 1.0 | % |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Extreme Oxygen Index | ISO4589-2 | 25 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.