PC LEXAN™ 244RF-111 SABIC INNOVATIVE NANSHA

154

Unit Price:
$2900 USD/MT
Packaging Specification:
25 KG/PKG
Supply Quantity:
33MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 2787 3515View

serv********View

For more detailed information including pricing, customization, and shipping, please contact supplier.

Material Description

Technical Data Sheet

Material Description

Material Properties:Food contact compliance Medium viscosity Good demolding performanc Flame retardant
Application Areas:Electrical appliances Electronic display Nursing supplies Medical supplies
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result	Unit
Shrinkage rate	MD：3.20mm	内部方法	0.50到0.70	%
Water absorption rate	24hr	ASTMD570	0.15	%
	Water absorption rate	Equilibrium,23°C	ASTMD570	0.35	%
	Water absorption rate	Water absorption rate	Equilibrium,100°C	ASTMD570	0.58	%
Melt mass flow rate	300°C/1.2kg	ASTMD1238	11	g/10min
Specific volume		ASTMD792	0.830	cm³/g

Mechanical performance	Test Condition	Test Method	Test Result	Unit
Taber abraser	1000Cycles,1000g,CS-17Wheel	ASTMD1044	10.0	mg
Elongation rate 3	Yield	ASTMD638	7.0	%
Elongation rate 3	Elongation rate 3	Break	ASTMD638	130	%
Tensile strength 3	Yield	ASTMD638	62.0	Mpa
Tensile strength 3	Tensile strength 3	Break	ASTMD638	68.0	Mpa
Bending modulus 4	50.0mmSpan	ASTMD790	2340	Mpa
Bending strength 4	Yield,50.0mmSpan	ASTMD790	96.0	Mpa

Thermal performance	Test Condition	Test Method	Test Result	Unit
Vicat softening temperature		ASTMD15256	154	°C
specific heat		ASTMC351	1250	J/kg/°C
thermal conductivity		ASTMC177	0.27	W/m/K
Linear coefficient of thermal expansion	MD：-40to95°C	ASTME831	6.8E-05	cm/cm/°C
Hot deformation temperature	0.45MPa,Unannealed,6.40mm	ASTMD648	137	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed,6.40mm	ASTMD648	132	°C
RTIElec		UL746	130	°C
Evolution Calendar intelligent importer		UL746	130	°C
RTI		UL746	130	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Dissipation factor	50Hz	ASTMD150	9E-04
	Dissipation factor	60Hz	ASTMD150	9E-04
	Dissipation factor	Dissipation factor	1MHz	ASTMD150	0.010
Dielectric constant	1MHz	ASTMD150	2.96
	Dielectric constant	50Hz	ASTMD150	3.17
	Dielectric constant	Dielectric constant	60Hz	ASTMD150	3.17
Volume resistivity		ASTMD257	>1.0E+17	ohms·cm
Dielectric strength	3.20mm,inAir	ASTMD149	15	KV/mm
Compared to the anti leakage trace index	CTI	UL746	PLC2
Hot wire ignition	HWI	UL746	PLC2
High arc combustion index	HAI	UL746	PLC1
High voltage arc tracing rate	HVTR	UL746	PLC2

Impact performance	Test Condition	Test Method	Test Result	Unit
Falling hammer impact	23°C	ASTMD3029	169	J
Cantilever beam without notch impact strength	23°C	ASTMD4812	3200	J/m
Tensile impact strength 5		ASTMD1822	577	kJ/m²

hardness	Test Condition	Test Method	Test Result	Unit
Rockwell hardness	M-Scale	ASTMD785	70
Rockwell hardness	Rockwell hardness	R-Scale	ASTMD785	118

optical performance	Test Condition	Test Method	Test Result	Unit
transmissivity	2540µm	ASTMD1003	88.0	%
Haze	2540µm	ASTMD1003	1.0	%
Refractive index		ASTMD542	1.586

flammability	Test Condition	Test Method	Test Result	Unit
Hot filament ignition temperature	1.0mm	IEC60695-2-13	875	°C
Extreme Oxygen Index		ASTMD2863	25	%
UL flame retardant rating	1.5mm	UL94	V-2
Burning wire flammability index	1.0mm	IEC60695-2-12	850	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.