PC LEXAN™ EXL9330 BL1B157 SABIC INNOVATIVE SHANGHAI

132

Unit Price:
$4444 USD/MT
Packaging Specification:
25 KG/PKG
Supply Quantity:
10MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 2787 3515View

serv********View

For more detailed information including pricing, customization, and shipping, please contact supplier.

Material Description

Technical Data Sheet

Material Description

Material Properties:Flame retardant Toughening UV resistance
Application Areas:Thin walled products food Lighting fixtures
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result	Unit
Melt flow rate	300°C/1.2 kg	ASTM D1238	10	g/10 min
Molten Volume Flow Rate (MVR)	300°C/1.2 kg	ISO 1133	9.00	cm3/10min
Shrinkage rate	Flow : 3.20 mm	内部方法	0.40 到 0.80	%
Shrinkage rate	Shrinkage rate	Across Flow : 3.20 mm	内部方法	0.40 到 0.80	%
Water absorption rate	Saturation, 23°C	ISO 62	0.35	%
Water absorption rate	Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	0.15	%
Outdoor applicability		UL 746C	f1

Mechanical performance	Test Condition	Test Method	Test Result	Unit
Tensile modulus	-- 2	ASTM D638	2100	Mpa
Tensile modulus	Tensile modulus	--	ISO 527-2/1	2100	Mpa
Tensile strength	Yield 3	ASTM D638	58.0	Mpa
	Tensile strength	Yield	ISO 527-2/50	55.0	Mpa
		Tensile strength	Break 3	ASTM D638	61.0	Mpa
		Tensile strength	Tensile strength	Break	ISO 527-2/50	60.0	Mpa
elongation	Yield 3	ASTM D638	6.0	%
	elongation	Yield	ISO 527-2/50	6.0	%
		elongation	Break 3	ASTM D638	130	%
		elongation	elongation	Break	ISO 527-2/50	130	%
Bending modulus	50.0 mm Span 4	ASTM D790	2060	Mpa
Bending modulus	Bending modulus	-- 5	ISO 178	2200	Mpa
Bending stress	-- 5, 6	ISO 178	85.0	Mpa
Bending stress	Bending stress	Yield, 50.0 mm Span 4	ASTM D790	88.0	Mpa

Thermal performance	Test Condition	Test Method	Test Result	Unit
Thermal deformation temperature under load	0.45 MPa, Unannealed, 3.20 mm	ASTM D648	134	°C
	Thermal deformation temperature under load	0.45 MPa, Unannealed, 4.00 mm, 100 mm Span 11	ISO 75-2/Be	135	°C
		Thermal deformation temperature under load	1.8 MPa, Unannealed, 3.20 mm	ASTM D648	120	°C
			Thermal deformation temperature under load	1.8 MPa, Unannealed, 6.40 mm	ASTM D648	124	°C
			Thermal deformation temperature under load	Thermal deformation temperature under load	1.8 MPa, Unannealed, 4.00 mm, 100 mm Span 11	ISO 75-2/Ae	124	°C
Vicat softening temperature	--	ASTM D152512, ISO 306/B12012	142	°C
Vicat softening temperature	Vicat softening temperature	--	ISO 306/B50	140	°C
Ball Pressure Test	123 to 127°C	IEC 60695-10-2	通过
Linear coefficient of thermal expansion	Flow : -40 to 40°C	ASTM E831	6.7E-5	cm/cm/°C
	Linear coefficient of thermal expansion	Flow : 23 to 80°C	ISO 11359-2	7.2E-5	cm/cm/°C
		Linear coefficient of thermal expansion	Across Flow : -40 to 40°C	ASTM E831	6.7E-5	cm/cm/°C
		Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow : 23 to 80°C	ISO 11359-2	7.7E-5	cm/cm/°C
RTI Elec		UL 746	125	°C
RTI Imp		UL 746	115	°C
RTI		UL 746	120	°C

Electrical performance	Test Condition	Test Method	Test Result	Unit
Surface resistivity		IEC 60093	> 1.0E+15	ohms
Volume resistivity		IEC 60093	> 1.0E+15	ohms·cm
Dielectric strength	3.20 mm, in Oil	ASTM D149	17	KV/mm
Dielectric strength	Dielectric strength	3.20 mm, in Oil	IEC 60243-1	16	KV/mm
Dielectric constant	60 Hz	ASTM D150	2.95
	Dielectric constant	50 kHz	ASTM D150	2.95
		Dielectric constant	1 MHz	ASTM D150	2.90
			Dielectric constant	50 Hz	IEC 60250	2.60
				Dielectric constant	60 Hz	IEC 60250	2.60
				Dielectric constant	Dielectric constant	1 MHz	IEC 60250	2.70
Dissipation factor	50 Hz	ASTM D150	2.4E-3
	Dissipation factor	60 Hz	ASTM D150	2.4E-3
		Dissipation factor	1 MHz	ASTM D150, IEC 60250	8.5E-3
			Dissipation factor	50 Hz	IEC 60250	1.0E-3
			Dissipation factor	Dissipation factor	60 Hz	IEC 60250	1.0E-3
Compared to the Leakage Tracking Index (CTI)		UL 746	PLC 3
Leakage Trace Index		IEC 60112	225	V
High arc combustion index (HAI) 13		UL 746	PLC 0
Hot wire ignition (HWI)		UL 746	PLC 1

injection	Test Result	Unit
drying temperature	120	°C
drying time	3.0 到 4.0	hr
Suggested maximum moisture content	0.020	%
Screw speed	40 到 70	rpm
Exhaust hole depth	0.025 到 0.076	mm
Suggested injection volume	40 到 60	%
Temperature at the rear of the barrel	215 到 295	°C
Temperature in the middle of the barrel	280 到 305	°C
Temperature at the front of the material cylinder	295 到 315	°C
Spray nozzle temperature	290 到 310	°C
Processing (melt) temperature	295 到 315	°C
Mold temperature	70 到 95	°C
Back pressure	0.300 到 0.700	Mpa

Impact performance	Test Condition	Test Method	Test Result	Unit
Impact strength of simply supported beam gap 7	-30°C	ISO 179/1eA	60	kJ/m²
Impact strength of simply supported beam gap 7	Impact strength of simply supported beam gap 7	23°C	ISO 179/1eA	75	kJ/m²
The impact strength of a simply supported beam without a notch is 7	-30°C	ISO 179/1eU	无断裂
	The impact strength of a simply supported beam without a notch is 7	23°C	ISO 179/1eU	无断裂
Unscented Izod Impact Strength 9	-30°C	ISO 180/1U	无断裂
Unscented Izod Impact Strength 9	Unscented Izod Impact Strength 9	23°C	ISO 180/1U	无断裂
Dart impact equipped with measuring instruments	23°C, Total Energy	ASTM D3763	52.0	J

hardness	Test Condition	Test Method	Test Result	Unit
Ball pressure hardness	H 358/30	ISO 2039-1	90.0	Mpa

flammability	Test Condition	Test Method	Test Result	Unit
UL flame retardant rating	1.5 mm	UL 94	V-0
UL flame retardant rating	UL flame retardant rating	3.0 mm	UL 94	5VA
Burning wire flammability index	1.0 mm	IEC 60695-2-12	960	°C
Hot filament ignition temperature	1.0 mm	IEC 60695-2-13	825	°C
Extreme Oxygen Index		ISO 4589-2	35	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.