Technical Data Sheet
Compare
| Physical properties | Test Condition | Test Method | Test Result | Unit |
|---|
| density | | ASTM D792/ISO 1183 | 1.38 | |
| Melt index (flow coefficient) | | ASTM D1238/ISO 1133 | 35 cm3/10min(300℃/1.2kg ) | g/10min |
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|
| Melt volume flow rate | 300°C/1.2kg | ISO1133 | 35.0 | cm3/10min |
| Shrinkage rate | TD:2.00mm | 内部方法 | 0.50to0.60 | % |
| Shrinkage rate | MD:2.00mm | 内部方法 | 0.50to0.60 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Tensile stress | Yield | ISO527-2 | 50.0 | Mpa |
| Nominal tensile fracture strain | | ISO527-2 | 70 | % |
| Bending modulus | | ISO178 | 2200 | Mpa |
| Bending stress | | ISO178 | 80.0 | Mpa |
| Tensile yield stress | | ISO 527-1 | 50 | Mpa |
| elongation | Break | ISO 527-1 | 70 | % |
| Tensile modulus of elasticity | | ISO 527-1 | 2100 | Mpa |
| bending strength | | ISO 178 | 80 | Mpa |
| Flexural modulus of elasticity | | ISO 178 | 2200 | Mpa |
| Gap impact strength | | ISO 176 | 30 | k/Jm2 |
| elongation at break | | ASTM D638/ISO 527 | tB 70 | % |
| tensile strength | | ASTM D638/ISO 527 | 50 | kg/cm²(MPa)[Lb/in²] |
| Bending modulus | | ASTM D790/ISO 178 | 2.2(GPa) | kg/cm²(MPa)[Lb/in²] |
| bending strength | | ASTM D790/ISO 178 | 80 | kg/cm²(MPa)[Lb/in²] |
| IZOD notch impact strength | | ASTM D256/ISO 179 | 30 | kg·cm/cm(J/M)ft·lb/in |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|
| Hot deformation temperature | 0.45MPa,Unannealed | ISO75-2/B | 136 | °C |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO75-2/A | 125 | °C |
| Linear coefficient of thermal expansion | MD | ISO11359-2 | 6.5E-05 | cm/cm/°C |
| RTIElec | | UL746 | 80.0 | °C |
| Combustibility (rate) | | UL94 | V0/1.0mm | |
| Evolution Calendar intelligent importer | | UL746 | 80.0 | °C |
| RTIStr | | UL746 | 80.0 | °C |
| Hot deformation temperature | 1.8MPa | ISO 75-1-2 | 125 | °C |
| Hot deformation temperature | 0.46MPa | ISO 75-1-2 | 136 | °C |
| Flame retardancy | 1.0mm | UL94 | V-0 | |
| optical performance | Test Condition | Test Method | Test Result | Unit |
|---|
| transmissivity | 1000µm | ISO13468-1 | 0.1 | % |
| Huangdu Index 3 | | | 9.0 | YI |
| Reflectivity 2 | | | 97.5 | |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|
| FlameRating | 1.0mm,NC | UL94 | V-0 | |
| Supplementary Information | Test Condition | Test Method | Test Result | Unit |
|---|
| ISO Shortcut | | | >PC-MD20< | |
| Other performance | Test Condition | Test Method | Test Result | Unit |
|---|
| MVR | | ISO 1133 | 32 | cm3/10min |
| Light reflectance | D65 type,10 | | 97.5 | |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
