PC LEXAN™ HF1110-111 SABIC INNOVATIVE CHONGQING

112

Unit Price:
$2852 USD/MT
Packaging Specification:
25 KG/PKG
Supply Quantity:
25MT
Delivery Terms:
FOB
Port of Loading:
China Main Port
Accepted Payment Methods:
T/T
Shipping:
Negotiate supplier for shipping details

Supplier Information

ASIA PLASTIC EXCHANGE LIMITED

+86 755 2787 3515View

serv********View

For more detailed information including pricing, customization, and shipping, please contact supplier.

Material Description

Technical Data Sheet

Material Description

Material Properties:High mobility High temperature resistan transparent
Application Areas:Electronic and electrical Automotive components
Color:--
Grade:Injection grade

Technical Data Sheet Compare

physical property	Test Condition	Test Method	Test Result	Unit
Melt flow rate	300°C/1.2 kg	ASTM D1238	25	g/10 min
Shrinkage rate - flow	3.20 mm	内部方法	0.50 到 0.70	%
Water absorption rate	24 hr	ASTM D570	0.10	%
	Water absorption rate	Equilibrium, 23°C	ASTM D570	0.35	%
	Water absorption rate	Water absorption rate	Equilibrium, 100°C	ASTM D570	0.58	%

Mechanical performance	Test Condition	Test Method	Test Result	Unit
Tensile strength 2	Yield	ASTM D638	62.0	Mpa
Tensile strength 2	Tensile strength 2	Break	ASTM D638	65.0	Mpa
elongation	Break	ASTM D638	120	%
Bending modulus	50.0 mm Span	ASTM D790	2300	Mpa
bending strength	Yield, 50.0 mm Span	ASTM D790	93.0	Mpa

Thermal performance	Test Condition	Test Method	Test Result	Unit
Thermal deformation temperature under load	1.8 MPa, Unannealed, 3.20 mm	ASTM D648	126	°C
RTI Elec		UL 746	130	°C
RTI Imp		UL 746	130	°C
RTI		UL 746	130	°C

Electrical performance	Test Method	Test Result
Compared to the Leakage Tracking Index (CTI)	UL 746	PLC 2
High arc combustion index (HAI) 5	UL 746	PLC 1
High Voltage Arc Traceability Rate (HVTR)	UL 746	PLC 2
Hot wire ignition (HWI)	UL 746	PLC 2

injection	Test Result	Unit
drying temperature	120	°C
drying time	3.0 到 4.0	hr
Suggested maximum moisture content	0.020	%
Suggested injection volume	40 到 60	%
Temperature at the rear of the barrel	250 到 270	°C
Temperature in the middle of the barrel	260 到 280	°C
Temperature at the front of the material cylinder	270 到 295	°C
Spray nozzle temperature	265 到 290	°C
Processing (melt) temperature	270 到 295	°C
Mold temperature	70 到 95	°C
Back pressure	0.300 到 0.700	Mpa
Screw speed	40 到 70	rpm
Exhaust hole depth	0.025 到 0.076	mm

Impact performance	Test Condition	Test Method	Test Result	Unit
Dart impact equipped with measuring instruments	23°C, Energy at Peak	ASTM D3763	54.0	J
Tensile impact strength 4		ASTM D1822	378	kJ/m²

optical performance	Test Condition	Test Method	Test Result	Unit
transmissivity	2540 µm	ASTM D1003	88.0	%
Haze	2540 µm	ASTM D1003	1.0	%

flammability	Test Condition	Test Method	Test Result	Unit
UL flame retardant rating	1.1 mm	UL 94	V-2

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.