PP GLOBALENE® ST868M LCY TAIWAN
265
- Unit Price:
- $1429 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 165.1MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:Low temperature resistanc High gloss High mobility
- Application Areas:Office supplies Gear Drawer rails Curtain accessories Electrical appliances Electronic accessories Pipe fittings bottle container
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Density/specific gravity | ASTMD792 | 0.896 | g/cm³ | |
| Melt mass flow rate | 230°C/2.16kg | ASTMD1238 | 18 | g/10min |
| Shrinkage rate | MD | ASTMD955 | 1.3 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile strength | Yield | ASTMD638 | 28.4 | Mpa |
| elongation | Yield | ASTMD638 | 12 | % |
| Bending modulus | ASTMD790 | 1030 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | ASTMD648 | 86 | °C |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTMD256 | 37 | J/m |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Rockwell hardness | R-Scale | ASTMD785 | 84 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.