ABS Novodur® H605 INEOS USA
145
- Unit Price:
- $3568 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 10MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:heat-resisting
- Application Areas:Automotive sector Application in the automo Automotive interior equip
- Color:--
- Grade:Heat resistant grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Density/specific gravity | ISO1183 | 1.05 | g/cm³ | |
| Melt volume flow rate | 220°C/10.0kg | ISO1133 | 25.0 | cm3/10min |
| Shrinkage rate | ISO294-4 | 0.40到0.60 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile modulus | ISO527-2 | 2400 | Mpa | |
| Tensile stress | Yield,23°C | ISO527-2 | 47.0 | Mpa |
| Tensile strain | Yield,23°C | ISO527-2 | 2.5 | % |
| Break,23°C | ISO527-2 | >15 | % | |
| Bending modulus | ISO178 | 2400 | Mpa | |
| Bending stress | ISO178 | 72.0 | Mpa |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature 3 | 0.45MPa,Annealed | ISO75-2/B | 102 | °C |
| 1.8MPa,Annealed | ISO75-2/A | 98.0 | °C | |
| Vicat softening temperature | ISO306/B50 | 101 | °C | |
| Linear coefficient of thermal expansion | MD | ISO11359-2 | 8E-05 | cm/cm/°C |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Dielectric strength | 1.50mm | IEC60243-1 | 33 | KV/mm |
| Relative permittivity | 100Hz | IEC60250 | 3.10 | |
| 1MHz | IEC60250 | 3.00 | ||
| Dissipation factor | 100Hz | IEC60250 | 5E-03 | |
| 1MHz | IEC60250 | 8E-03 | ||
| Leakage Trace Index | IEC60112 | 600 | V |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Charpy Notched Impact Strength | -30°C | ISO179 | 7.0 | kJ/m² |
| 23°C | ISO179 | 17 | kJ/m² | |
| Impact strength of simply supported beam without notch | -30°C | ISO179 | 80 | kJ/m² |
| 23°C | ISO179 | 90 | kJ/m² | |
| Impact strength of cantilever beam gap | -30°C | ISO180/A | 7.0 | kJ/m² |
| 23°C | ISO180/A | 17 | kJ/m² |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Ball pressure hardness | ISO2039-1 | 105 | Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.