PC LEXAN™ EXL6013-88225 SABIC EU
75
- Unit Price:
- $3397 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 20MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:High mobility Ductility at low temperat Short molding cycle
- Application Areas:Electronic and Electrical Aerospace Applications lens
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Water absorption rate | Equilibrium,23°C,50%RH | ISO62 | 0.15 | % |
| Melt volume flow rate | 300°C/1.2kg | ISO1133 | 5.50 | cm3/10min |
| Shrinkage rate | MD1 | 内部方法 | 0.60到0.80 | % |
| Water absorption rate | Saturation,23°C | ISO62 | 0.35 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile modulus | ISO527-2/1 | 2100 | Mpa | |
| Tensile stress | Yield | ISO527-2/50 | 55.0 | Mpa |
| Break | ISO527-2/50 | 60.0 | Mpa | |
| Tensile strain | Yield | ISO527-2/50 | 7.0 | % |
| Break | ISO527-2/50 | 100 | % | |
| Bending modulus 2 | ISO178 | 2150 | Mpa | |
| Bending stress 3 | ISO178 | 80.0 | Mpa | |
| Taber abraser | 1000Cycles,1000g,CS-17Wheel | 内部方法 | 10.0 | mg |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| 0.45MPa, unannealed, 100mm span | ISO75-2/Be | 131 | °C | |
| 1.8MPa, unannealed, 100mm span | ISO75-2/Ae | 122 | °C | |
| -- | ISO306/B50 | 138 | °C | |
| ISO306/B120 | 140 | °C | ||
| BallPressure Test | 125°C | IEC60695-10-2 | Pass | |
| Linear coefficient of thermal expansion | MD:23to80°C | ISO11359-2 | 7E-05 | cm/cm/°C |
| TD:23to80°C | ISO11359-2 | 7E-05 | cm/cm/°C | |
| thermal conductivity | ISO8302 | 0.20 | W/m/K |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Surface resistivity | IEC60093 | >1.0E+15 | ohms | |
| Volume resistivity | IEC60093 | >1.0E+15 | ohms·cm | |
| Dielectric strength | 3.20mm,in Oil | IEC60243-1 | 17 | KV/mm |
| Relative permittivity | 50Hz | IEC60250 | 2.70 | |
| 60Hz | IEC60250 | 2.70 | ||
| 1MHz | IEC60250 | 2.70 | ||
| Dissipation factor | 50Hz | IEC60250 | 1E-03 | |
| 60Hz | IEC60250 | 1E-03 | ||
| 1MHz | IEC60250 | 0.010 | ||
| Leakage Trace Index | IEC60112 | 175 | V |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam gap 4 | -30°C | ISO179/1eA | 70 | kJ/m² |
| 23°C | ISO179/1eA | 75 | kJ/m² | |
| Simply supported beam without notch impact strength 5 | -30°C | ISO179/1eU | 无断裂 | |
| 23°C | ISO179/1eU | 无断裂 | ||
| Suspended wall beam notch impact strength 6 | -30°C | ISO180/1A | 60 | kJ/m² |
| 23°C | ISO180/1A | 70 | kJ/m² | |
| Unscented Izod Impact Strength 7 | -30°C | ISO180/1U | 无断裂 | |
| 23°C | ISO180/1U | 无断裂 |
| hardness | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Ball pressure hardness | H358/30 | ISO2039-1 | 90.0 | Mpa |
| flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| UL flame retardant rating | 3.00mm | UL94 | V-1 | |
| Burning wire flammability index | 1.00mm | IEC60695-2-12 | 850 | °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.