PA66 Ultramid® A3X2G10 BK BASF MALAYSIA
71
- Unit Price:
- $4703 USD/MT
- Packaging Specification:
- 25 KG/PKG
- Supply Quantity:
- 15MT
- Delivery Terms:
- FOB
- Port of Loading:
- China Main Port
- Accepted Payment Methods:
- T/T
- Shipping:
- Negotiate supplier for shipping details
Supplier Information
ASIA PLASTIC EXCHANGE LIMITED
+86 755 2787 3515View
serv********View
For more detailed information including pricing, customization, and shipping, please contact supplier.
Material Description
Technical Data Sheet
Material Description
- Material Properties:High mobility heat-resisting
- Application Areas:Industrial machinery Connector
- Color:--
- Grade:Injection grade
Technical Data Sheet
Compare
| physical property | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Melt volume flow rate | 275℃，5 kg | ISO 1133 | 25 | cm3/10min |
| Shrinkage rate | TD | 0.4 | % | |
| Viscosity value | 0.5% in 96 % H2SO4 | ISO 307, 1157, 1628 | 140 | cm³/g |
| Water absorption rate | Saturation | ISO 62 | 3.7 - 4.3 | % |
| Equilibrium，23℃，50% RH，2.00 mm | ISO 62 | 0.70 - 1.10 | % |
| Mechanical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Tensile modulus | ISO 527-1-2 | 16000 / 12000 | Mpa | |
| Tensile strain | ISO 527-1-2 | 180 / 130 | Mpa | |
| Tensile creep modulus | 1000hr，Strain<= 0.5％，23℃ | ISO 899-1 | * / 5400 | Mpa |
| Bending modulus | ISO 178 | 13000 / - | Mpa |
| Electrical performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Dielectric constant | 1MHz | IEC 60250 | 3.6 / 5 | |
| Dissipative factor | IEC 60093 | 1E13 / 1E10 | E-4 | |
| Volume resistivity | IEC 60093 | /1E10 | Ohm*m | |
| 表面电阻率 | IEC 60112 | 600 | ohms |
| Impact performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam gap | 23°C | ISO 179/1eA | 13 / 16 | kJ/m² |
| -30℃ | ISO 179/1eA | 11 / - | kJ/m² | |
| Impact strength of simply supported beam without notch | 23℃ | ISO 179/1eA | 55 / 55 | kJ/m² |
| -30℃ | ISO 179/1eA | 50 / - | kJ/m² | |
| Impact strength of cantilever beam gap | 23℃ | ISO 180-A | 14 / 20 | kJ/m² |
| Processing | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Melting temperature | ISO 11357-1/-3 | 260 | °C | |
| Melt temperature | 290 - 300 | °C | ||
| Mold temperature | 80-90 | °C |
| Flammability | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Burning wire flammability index | 厚度10mm | IEC 60695-2-12 | 960 | °C |
| Extreme Oxygen Index | ISO 4589-1/-2 | 27 | % | |
| Smoke density | EN ISO 5659-2: 2007 | 184 | ||
| Smoke toxicity | NF X70-100-1/-2 | 0.36 |
| Thermal performance | Test Condition | Test Method | Test Result | Unit |
|---|---|---|---|---|
| Hot deformation temperature | 1.8 MPa | ISO 75-1/2 | 250 | °C |
| 0.45 MPa | ISO 75-1/2 | 250 | °C | |
| Linear coefficient of thermal expansion | Across Flow：23~80°C | ISO 11359-1/-2 | 40-50 | E-6/K |
| MD：23~80℃ | ISO 11359-1/-2 | 15 - 20 | E-6/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.